Paper
15 July 2004 Dye-sensitized solar cells using laser processing techniques
Author Affiliations +
Abstract
Laser processing techniques, such as laser direct-write (LDW) and laser sintering, have been used to deposit mesoporous nanocrystalline TiO2 (nc-TiO2) films for use in dye-sensitized solar cells. LDW enables the fabrication of conformal structures containing metals, ceramics, polymers and composites on rigid and flexible substrates without the use of masks or additional patterning techniques. The transferred material maintains a porous, high surface area structure that is ideally suited for dye-sensitized solar cells. In this experiment, a pulsed UV laser (355nm) is used to forward transfer a paste of commercial TiO2 nanopowder (P25) onto transparent conducting electrodes on flexible polyethyleneterephthalate (PET) and rigid glass substrates. For the cells based on flexible PET substrates, the transferred TiO2 layers were sintered using an in-situ laser to improve electron paths without damaging PET substrates. In this paper, we demonstrate the use of laser processing techniques to produce nc-TiO2 films (~10 μm thickness) on glass for use in dye-sensitized solar cells (Voc = 690 mV, Jsc = 8.7 mA/cm2, ff = 0.67, η = 4.0 % at 100 mW/cm2). This work was supported by the Office of Naval Research.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Heungsoo Kim, Alberto Pique, Gary P. Kushto, Raymond C. Y. Auyeung, S. H. Lee, Craig B. Arnold, and Zakia H. Kafafi "Dye-sensitized solar cells using laser processing techniques", Proc. SPIE 5339, Photon Processing in Microelectronics and Photonics III, (15 July 2004); https://doi.org/10.1117/12.537903
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dye sensitized solar cells

Glasses

Laser sintering

Positron emission tomography

Transparent conductors

Laser processing

Electrodes

RELATED CONTENT

Selective laser patterning in organic solar cells
Proceedings of SPIE (October 08 2014)
All screen printed dye solar cell
Proceedings of SPIE (October 17 2007)
First large-area dye solar cells
Proceedings of SPIE (February 06 2004)

Back to Top