Dr. Alberto Piqué Profile

Dr. Alberto Piqué

Section Head at US Naval Research Lab

SPIE Involvement:

Conference Program Committee | Track Chair | Author | Editor

Publications (49)

Proceedings Article | 8 March 2021 Presentation + Paper

Benchmarking print quality of additively manufactured ceramic nanosuspensions toward consistent fabrication using laser stereolithography

Celeste Brown, Nicholas Charipar, Charles Rohde, Grant Warner, Alberto Piqué

Proceedings Volume 11677, 116770W (2021) https://doi.org/10.1117/12.2583124

KEYWORDS: Additive manufacturing, Stereolithography, Ceramics, Nanolithography, Nonimpact printing, Composites, Nanoparticles, Surface roughness, Silica, Metamaterials

Read Abstract +

Architected materials present an opportunity to overcome the limited ability of brittle piezoelectric ceramics to strain under electromechanical load. In the absence of a commercially available resin containing piezoelectric nanoparticles, this work seeks to investigate the printability and thermal processability of a prepared piezoelectric particle loaded slurry using laser stereolithography. This was accomplished by comparing the cure depth, in-plane resolution, and the dimensional accuracy achieved with a piezoelectric slurry prepared with barium titanate, to a commercially available silica and alumina-based suspension. The study of thermal processability revealed the dimensional sensitivity of fabricated open architectures to sintering temperature and duration. The prepared piezoceramic slurry, containing barium titanate, was successfully polymerized using laser-stereolithography and its cure depth exhibited a similar response to exposure duration and fluence level as the commercial slurries. The in-plane resolution of the barium titanate-based slurry was unexpectedly high, and may be due to the opacity of the piezoelectric particles. Open architectures with millimeter sized features were successfully fabricated using laser stereolithography. Dimensional accuracy was highest for the alumina-based material system, and the inverse relationship between cured depth and in-plane resolution was reflected in the dimensions of the silica-based parts. Open architected structures further withstood thermal processing. During thermal processing, there was a greater reduction in height for all parts due to higher in-plane concentrations of ceramic particles, relative to the z-direction. Both an increase in sintering temperature and duration resulted in a uniform change of 1%, respectively, in part dimensions. Data collected in this work is to be used as a benchmark to inform formulation requirements, laser stereolithography parameter settings and thermal processing procedures for a custom ceramic slurry containing piezoelectric nanoparticles.

Proceedings Article | 5 March 2021 Presentation + Paper

La-doped BaSnO3 films for near- and mid-infrared plasmonic applications

Heungsoo Kim, Nicholas Charipar, Raymond C. Auyeung, Kristin Charipar, Alberto Piqué

Proceedings Volume 11687, 1168712 (2021) https://doi.org/10.1117/12.2578946

KEYWORDS: Plasmonics, Perovskite, Oxygen, Oxides, Mid-IR, Thin films, Optical properties, Zinc oxide, Transparent conductors, Transparent conducting oxide

Read Abstract +

Proceedings Article | 2 March 2020 Paper

Laser processing of titanium: oxide formation for electronic applications

Kristin Charipar, Heungsoo Kim, Christopher Musi, Raymond C. Y. Auyeung, Alberto Piqué, Nicholas Charipar

Proceedings Volume 11267, 112670H (2020) https://doi.org/10.1117/12.2546952

KEYWORDS: Titanium, Laser processing, Oxides, Thin films, Raman spectroscopy, Picosecond phenomena, Femtosecond phenomena, Pulsed laser deposition, Thin film growth

Read Abstract +

Proceedings Article | 2 March 2020 Paper

Laser processing of plasmonic metal oxides and phase change materials

Heungsoo Kim, Nicholas Charipar, Raymond C. Auyeung, Kristin Charipar, Alberto Piqué

Proceedings Volume 11268, 1126816 (2020) https://doi.org/10.1117/12.2546933

KEYWORDS: Plasmonics, Oxides, Laser processing, Near infrared, Thin films, Optical properties, Pulsed laser operation

Read Abstract +

Proceedings Article | 4 March 2019 Paper

Reusable laser-absorbing layers for LIFT

Kristin Charipar, Rubén Díaz-Rivera, Nérida De Jesús-Villanueva, Raymond C. Y. Auyeung, Nicholas Charipar, Alberto Piqué

Proceedings Volume 10905, 109050K (2019) https://doi.org/10.1117/12.2513012

KEYWORDS: Laser manufacturing, Laser processing, 3D printing, Laser-matter interactions, Nanowires, Metals, Printing, Nonimpact printing, Laser energy, Fabrication

Read Abstract +

Proceedings Article | 26 February 2018 Paper

Laser-induced forward transfer (LIFT) of 3D microstructures

Kristin Charipar, Rubén Díaz-Rivera, Nicholas Charipar, Alberto Piqué

Proceedings Volume 10523, 105230R (2018) https://doi.org/10.1117/12.2294578

KEYWORDS: Nonimpact printing, Switches, Microelectronics, Printing, Rapid manufacturing, Fabrication, Laser-matter interactions

Read Abstract +

Proceedings Article | 24 August 2017 Paper

Harnessing the metal-insulator transition for tunable metamaterials

Nicholas Charipar, Kristin Charipar, Heungsoo Kim, Nicholas Bingham, Ryan Suess, Scott Mathews, Raymond C. Auyeung, Alberto Piqué

Proceedings Volume 10343, 103430T (2017) https://doi.org/10.1117/12.2275864

KEYWORDS: Transition metals, Metamaterials, Thin films, Tunable metamaterials, Vanadium, Thin film devices, Metals, Light-matter interactions, Electromagnetic radiation, Fast packet switching

Read Abstract +

Proceedings Article | 20 February 2017 Paper

Laser processing of VO2 thin films for THz devices and metamaterials

Nicholas Charipar, Kristin Charipar, Heungsoo Kim, Scott Mathews, Eric Breckenfeld, Raymond C. Auyeung, Alberto Piqué

Proceedings Volume 10091, 1009102 (2017) https://doi.org/10.1117/12.2256120

KEYWORDS: Thin films, Terahertz radiation, Transition metals, Laser processing, Thin film devices, Vanadium, Pulsed laser deposition, Fast packet switching, Modulators, Metamaterials, Picosecond phenomena, Femtosecond phenomena

Read Abstract +

Proceedings Article | 6 April 2016 Paper

Laser printing and femtosecond laser structuring of electrode materials for the manufacturing of 3D lithium-ion micro-batteries

P. Smyrek, H. Kim, Y. Zheng, H. Seifert, A. Piqué, W. Pfleging

Proceedings Volume 9738, 973806 (2016) https://doi.org/10.1117/12.2211546

KEYWORDS: Electrodes, Femtosecond phenomena, Laser processing, Manufacturing, Laser development, Lithium, Diffusion, Manganese, Oxides, Composites

Read Abstract +

Proceedings Article | 6 April 2016 Paper

Laser printing of 3D metallic interconnects

Iyoel Beniam, Scott Mathews, Nicholas Charipar, Raymond Auyeung, Alberto Piqué

Proceedings Volume 9738, 97380I (2016) https://doi.org/10.1117/12.2213646

KEYWORDS: Laser applications, Metals, Printing, 3D printing, Additive manufacturing, Laser manufacturing, Bridges, Laser development, Copper, Beam shaping, Pulsed laser operation, Copper vapor lasers, Capacitors, Quartz, Electronics

Read Abstract +

Proceedings Article | 5 October 2015 Presentation

Laser processing of metamaterial structures (Presentation Recording)

Alberto Piqué, Nicholas Charipar, Heungsoo Kim, Eric Breckenfeld, Scott Mathews

Proceedings Volume 9544, 95441M (2015) https://doi.org/10.1117/12.2191645

KEYWORDS: Metamaterials, Laser processing, Plasmonics, Laser applications, Laser development, Video, Current controlled current source

Read Abstract +

Proceedings Article | 12 March 2015 Paper

Laser forward transfer of solder paste for microelectronics fabrication

Scott Mathews, Nicholas Charipar, Ray Auyeung, Heungsoo Kim, Alberto Piqué

Proceedings Volume 9351, 93510Y (2015) https://doi.org/10.1117/12.2080410

KEYWORDS: Laser welding, Copper, Photomicroscopy, Silver, Printing, Optical lithography, Pulsed laser operation, Particles, Microscopes, Scanning electron microscopy

Read Abstract +

SPIE Journal Paper | 21 August 2014 Open Access

Laser materials processing for micropower source applications: a review

Heungsoo Kim, Thomas Sutto, Alberto Piqué

JPE, Vol. 4, Issue 01, 040992, (August 2014) https://doi.org/10.1117/12.10.1117/1.JPE.4.040992

KEYWORDS: Laser processing, Thin films, Electrodes, Lithium, Silicon, Laser sintering, Oxides, Pulsed laser deposition, Dye sensitized solar cells, Fabrication

Read Abstract +

DOWNLOAD PAPER

Proceedings Article | 7 March 2014 Paper

Laser processing of conductive oxides for near-IR plasmonics

Alberto Piqué, Heungsoo Kim, Nicholas Charipar, Michael Osofsky

Proceedings Volume 8980, 89800Q (2014) https://doi.org/10.1117/12.2040735

KEYWORDS: Plasmonics, Oxides, Near infrared, Metals, Oxygen, Doping, Semiconductors, Zinc oxide, Optical properties, Tungsten

Read Abstract +

Proceedings Article | 6 March 2014 Paper

Laser embedding electronics on 3D printed objects

Matthew Kirleis, Duane Simonson, Nicholas Charipar, Heungsoo Kim, Kristin Charipar, Ray C. Auyeung, Scott Mathews, Alberto Piqué

Proceedings Volume 8970, 897004 (2014) https://doi.org/10.1117/12.2044222

KEYWORDS: Nickel, Additive manufacturing, 3D printing, Fused deposition modeling, Laser processing, Plating, Optical lithography, Metals, Electronics, 3D modeling

Read Abstract +

Proceedings Article | 6 March 2014 Paper

Laser-printed/structured thick-film electrodes for Li-ion microbatteries

Heungsoo Kim, Thomas Sutto, Johannes Proell, Robert Kohler, Wilhelm Pfleging, Alberto Piqué

Proceedings Volume 8968, 89680L (2014) https://doi.org/10.1117/12.2037287

KEYWORDS: Electrodes, Polymers, Laser processing, Thin films, Carbon, Lithium, Pulsed laser operation, Solid state lasers, Solids, Liquids

Read Abstract +

Proceedings Article | 6 March 2014 Paper

Fs-laser microstructuring of laser-printed LiMn2O4 electrodes for manufacturing of 3D microbatteries

J. Pröll, H. Kim, M. Mangang, H. Seifert, A. Piqué, W. Pfleging

Proceedings Volume 8968, 896805 (2014) https://doi.org/10.1117/12.2039902

KEYWORDS: Electrodes, Composites, 3D microstructuring, Particles, Lithium, Carbon, Laser processing, Pulsed laser operation, Scanning electron microscopy, Laser ablation

Read Abstract +

Proceedings Article | 29 May 2013 Paper

Neutron/gamma pulse shape discrimination (PSD) in plastic scintillators with digital PSD electronics

Anthony Hutcheson, Duane Simonson, Marc Christophersen, Bernard Phlips, Nicholas Charipar, Alberto Piqué

Proceedings Volume 8710, 87101K (2013) https://doi.org/10.1117/12.2018248

KEYWORDS: Scintillators, Sensors, Chromophores, Digital electronics, Electronics, Crystals, Diffusers, Oscilloscopes, Analytical research, Electrons

Read Abstract +

Proceedings Article | 29 March 2013 Paper

Laser processing of 2D and 3D metamaterial structures

Nicholas Charipar, Kristin Charipar, Heungsoo Kim, Matthew Kirleis, Ray C. Auyeung, Andrew Smith, Scott Mathews, Alberto Piqué

Proceedings Volume 8607, 86070T (2013) https://doi.org/10.1117/12.2006496

KEYWORDS: Metamaterials, Laser processing, Pulsed laser operation, Silver, Fabrication, Optical lithography, Micromachining, Laser applications, Additive manufacturing, Microscopes

Read Abstract +

Proceedings Article | 15 March 2013 Paper

Laser transfer of reconfigurable patterns with a spatial light modulator

Alberto Piqué, Ray C. Auyeung, Andrew Smith, Heungsoo Kim, Scott Mathews, Nicholas Charipar, Matthew Kirleis

Proceedings Volume 8608, 86080K (2013) https://doi.org/10.1117/12.2005345

KEYWORDS: Digital micromirror devices, Pulsed laser operation, Laser processing, Spatial light modulators, Silver, Laser applications, Nonimpact printing, Digital Light Processing, Scanning electron microscopy, Raster graphics

Read Abstract +

Proceedings Article | 15 October 2012 Paper

Realization of metamaterial structures by non-lithographic processes

Alberto Piqué, Nicholas Charipar, Heungsoo Kim, Matthew Kirleis, Ray Auyeung, Andrew Smith, Kristin Metkus, Scott Mathews

Proceedings Volume 8455, 845514 (2012) https://doi.org/10.1117/12.932649

KEYWORDS: Metamaterials, Pulsed laser operation, Digital micromirror devices, Digital Light Processing, Laser processing, Antennas, Silver, Metals, Scanning electron microscopy, Lithography

Read Abstract +

Proceedings Article | 18 February 2012 Paper

Analysis and characterization of the laser decal transfer process

Scott Mathews, Raymond C. Auyeung, Alberto Piqué

Proceedings Volume 8244, 82440A (2012) https://doi.org/10.1117/12.909264

KEYWORDS: Video, Laser processing, Laser applications, Cameras, Video processing, Silver, Objectives, Liquids, Laser systems engineering, Dielectrophoresis

Read Abstract +

Proceedings Article | 4 February 2012 Paper

Laser origami: a new technique for assembling 3D microstructures

Alberto Piqué, Scott Mathews, Nicholas Charipar, Andrew Birnbaum

Proceedings Volume 8244, 82440B (2012) https://doi.org/10.1117/12.909187

KEYWORDS: Copper, 3D microstructuring, Laser processing, Actuators, Polymers, Nonimpact printing, Photomicroscopy, Chemical elements, Pulsed laser operation, Microfabrication

Read Abstract +

Proceedings Article | 21 February 2011 Paper

Laser forward transfer for digital microfabrication

Alberto Piqué, Heungsoo Kim, Ray Auyeung, Andrew Birnbaum, Nicholas Charipar, Kristin Metkus, Scott Mathews

Proceedings Volume 7921, 792104 (2011) https://doi.org/10.1117/12.870998

KEYWORDS: Microfabrication, Thin films, Microelectronics, Lithography, Pulsed laser operation, Glasses, Silver, Scanning electron microscopy, Sensors, Etching

Read Abstract +

Proceedings Article | 20 February 2008 Paper

Laser decal transfer of electronic materials with thin film characteristics

Alberto Piqué, Raymond Auyeung, Kristin Metkus, Heungsoo Kim, Scott Mathews, Thomas Bailey, Xianhai Chen, Lydia Young

Proceedings Volume 6879, 687911 (2008) https://doi.org/10.1117/12.779672

KEYWORDS: Pulsed laser operation, Thin films, Glasses, Scanning electron microscopy, Laser processing, Silver, Microelectronics, Nonimpact printing, Printing, Nanoparticles

Read Abstract +

Proceedings Article | 25 April 2007 Paper

Applications of laser direct-write for embedding microelectronics

Alberto Piqué, Nicholas Charipar, Heungsoo Kim, Ray Auyeung, Scott Mathews

Proceedings Volume 6606, 66060R (2007) https://doi.org/10.1117/12.729635

KEYWORDS: Microelectronics, Laser processing, Silicon, Light emitting diodes, Polymers, Pulsed laser operation, Semiconductors, Nonimpact printing, Laser systems engineering, Excimer lasers

Read Abstract +

Proceedings Article | 13 March 2007 Paper

Rapid prototyping of frequency selective surfaces by laser direct-write

Scott Mathews, Mark Mirotznik, Brandon Good, Alberto Piqué

Proceedings Volume 6458, 64580R (2007) https://doi.org/10.1117/12.705957

KEYWORDS: FSS based metamaterials, Computer aided design, Antennas, Rapid manufacturing, Dielectrics, Microscopes, Laser processing, Electromagnetism, Optical lithography, Radar

Read Abstract +

Proceedings Article | 13 March 2007 Paper

Assembly and integration of thin bare die using laser direct-write

Alberto Piqué, Nicholas Charipar, Ray Auyeung, Heungsoo Kim, Scott Mathews

Proceedings Volume 6458, 645802 (2007) https://doi.org/10.1117/12.706950

KEYWORDS: Laser processing, Microelectronics, Semiconductor lasers, Silicon, Semiconductors, Pulsed laser operation, Light emitting diodes, Nanolithography, Polymers, Excimer lasers

Read Abstract +

Proceedings Article | 12 April 2005 Paper

Laser direct-write of embedded electronic components and circuits

Alberto Pique, Bhanu Pratap, Scott Mathews, B. Karns, Ray Auyeung, Moshe Kasser, Mike Ollinger, Heungsoo Kim, Sam Lakeou, Craig Arnold

Proceedings Volume 5713, (2005) https://doi.org/10.1117/12.596454

KEYWORDS: Photomicroscopy, Fabrication, Manufacturing, Electronic circuits, Micromachining, Resistors, Capacitors, Light emitting diodes, Laser processing, Resistance

Read Abstract +

Proceedings Article | 8 October 2004 Paper

Application of laser direct-write techniques for embedding electronic and micropower components

Alberto Pique, Scott Mathews, Raymond Auyeung, Michael Ollinger, Heungsoo Kim, Bhanu Pratap, Craig Arnold, Thomas Sutto

Proceedings Volume 5662, (2004) https://doi.org/10.1117/12.596562

KEYWORDS: Electronic components, Micromachining, Nonimpact printing, Electrodes, Resistors, Capacitors, Semiconductors, Silver, Laser development, Chemistry

Read Abstract +

Proceedings Article | 8 October 2004 Paper

Manufacture of mesoscale energy storage systems by laser-direct write

Craig Arnold, Heungsoo Kim, Michael Ollinger, Thomas Sutto, Alberto Pique

Proceedings Volume 5662, (2004) https://doi.org/10.1117/12.596561

KEYWORDS: Electrodes, Laser processing, Liquids, Chemistry, Solar energy, Lithium, Solar cells, Zinc, Manufacturing, Laser systems engineering

Read Abstract +

Proceedings Article | 15 July 2004 Paper

Laser-micromachined defect arrays for DC potential drop fatigue studies

Craig Arnold, Bhanu Pratap, Alberto Pique, Andrew Geltmacher, James Thomas

Proceedings Volume 5339, (2004) https://doi.org/10.1117/12.537794

KEYWORDS: Titanium, Copper, Lead, Adhesives, Composites, Laser development, Silver, Laser processing, Analytical research, Data acquisition

Read Abstract +

Proceedings Article | 15 July 2004 Paper

Laser fabrication of GPS conformal antennas

Raymond Auyeung, Michael Nurnberger, David Wendland, Alberto Pique, Craig Arnold, Anthony Abbott, Larry Schuette

Proceedings Volume 5339, (2004) https://doi.org/10.1117/12.532005

KEYWORDS: Antennas, Global Positioning System, Conformal antenna, Domes, Dielectrics, Metals, Coating, Prototyping, Rapid manufacturing, Manufacturing

Read Abstract +

Proceedings Article | 15 July 2004 Paper

Dye-sensitized solar cells using laser processing technologies

Heungsoo Kim, Alberto Pique, Gary Kushto, Raymond Auyeung, S. H. Lee, Craig Arnold, Zakia Kafafi

Proceedings Volume 5339, (2004) https://doi.org/10.1117/12.537903

KEYWORDS: Dye sensitized solar cells, Glasses, Laser sintering, Positron emission tomography, Transparent conductors, Laser processing, Electrodes, Solar cells, Fabrication, Pulsed laser operation

Read Abstract +

Proceedings Article | 17 October 2003 Paper

Laser direct-write of metal patterns for interconnects and antennas

Alberto Pique, Craig Arnold, Bhanu Pratap, Ray Auyeung, Heung Soo Kim, David Weir

Proceedings Volume 4977, (2003) https://doi.org/10.1117/12.479407

KEYWORDS: Antennas, Silver, Metals, Laser processing, Pulsed laser operation, Micromachining, Conformal antenna, Microelectronics, Manufacturing, Fabrication

Read Abstract +

Proceedings Article | 19 February 2003 Paper

Laser-induced forward transfer direct-write of miniature sensor and microbattery systems

Alberto Pique, Craig Arnold, Ryan Wartena, David Weir, Bhanu Pratap, Karen Swider-Lyons, Richard Kant, Douglas Chrisey

Proceedings Volume 4830, (2003) https://doi.org/10.1117/12.486567

KEYWORDS: Sensors, Electrodes, Fabrication, Silver, Prototyping, Chemical fiber sensors, Carbon, Resistance, Laser processing, Polymers

Read Abstract +

Proceedings Article | 15 January 2003 Paper

Depth and surface roughness control on laser micromachined polyimide for direct-write deposition

Bhanu Pratap, Craig Arnold, Alberto Pique

Proceedings Volume 4979, (2003) https://doi.org/10.1117/12.472801

KEYWORDS: Pulsed laser operation, Micromachining, Surface roughness, Laser energy, Silver, Ultraviolet radiation, Laser applications, Metals, Laser processing, Beam controllers

Read Abstract +

Proceedings Article | 18 June 2002 Paper

Direct-write of sensor devices by a laser forward transfer technique

Alberto Pique, David Weir, Peter Wu, Bhanu Pratap, Craig Arnold, Bradley Ringeisen, Robert McGill, Raymond C. Auyeung, Richard Kant, Douglas Chrisey

Proceedings Volume 4637, (2002) https://doi.org/10.1117/12.470642

KEYWORDS: Sensors, Chemical fiber sensors, Polymers, Silver, Temperature sensors, Fabrication, Biosensors, Chemical elements, Manufacturing, Electrodes

Read Abstract +

Proceedings Article | 18 June 2002 Paper

Cell-by-cell construction of living tissue

Bradley Ringeisen, Heungsoo Kim, Henry Young, Barry Spargo, Raymond C. Auyeung, Alberto Pique, Douglas Chrisey, Peter Wu

Proceedings Volume 4637, (2002) https://doi.org/10.1117/12.470640

KEYWORDS: Tissues, Proteins, Pulsed laser operation, Tissue engineering, Fabrication, Polymers, Laser energy, Photomicroscopy, Laser tissue interaction, Molecules

Read Abstract +

Proceedings Article | 18 June 2002 Paper

Direct writing of planar ultracapacitors by laser forward transfer processing

Craig Arnold, Ryan Wartena, Bhanu Pratap, Karen Swider-Lyons, Alberto Pique

Proceedings Volume 4637, (2002) https://doi.org/10.1117/12.470641

KEYWORDS: Capacitance, Oxides, Electrodes, Capacitors, Ruthenium, Laser processing, Pulsed laser operation, Thin films, Liquids, Ultraviolet radiation

Read Abstract +

Proceedings Article | 29 June 2001 Paper

Transparent conducting indium tin oxide thin film grown on flexible substrate by pulsed-laser deposition for organic light-emitting devices

Heungsoo Kim, James Horwitz, Gary Kushto, Zakya Kafafi, Alberto Pique, Douglas Chrisey

Proceedings Volume 4274, (2001) https://doi.org/10.1117/12.432510

KEYWORDS: Positron emission tomography, Glasses, Oxygen, Organic light emitting diodes, Transmittance, Thin films, Tin, Oxides, Thin film devices, Indium

Read Abstract +

Proceedings Article | 29 June 2001 Paper

Laser direct writing of microbatteries for integrated power electronics

Alberto Pique, Karen Swider-Lyons, David Weir, C. Love, R. Modi

Proceedings Volume 4274, (2001) https://doi.org/10.1117/12.432524

KEYWORDS: Zinc, Electronics, Electronic components, Glasses, Electrodes, Scanning electron microscopy, Laser development, Laser processing, Fabrication, Gold

Read Abstract +

A novel laser-based process developed at the Naval Research Laboratory has been used to fabricate pseudocapacitors and microbatteries with tailored capacities for small electronic devices having size and/or weight restrictions. This process, called MAPLE DW (for matrix-assisted pulsed-laser evaporation direct write) can deposit rugged mesoscale (1 micrometers to 10 mm) electronic components over any type of substrate. A pulsed laser operating at 355 nm is used to forward transfer material from a tape-cast ribbon to a suitable substrate to form a precision design. With MAPLE DW, customized mesoscale electronic components can be produced, eliminating the need for multiple fabrication techniques and surface-mounted components. Direct write processing is especially attractive for the fabrication of micro-power sources and systems. The versatility of laser processing allows battery designs to be easily modified. Batteries and/or pseudocapacitors can be integrated with power management electronics to deliver a wide range of power outputs. By building power sources directly on electronic components, the weight of the power sources is decreased as the electronic substrate becomes part of the battery packaging and the lengths of interconnects are shortened, reducing conductor losses. RuOxHy pseudocapacitors deposited with MAPLE DW show good storage capacities. Pads of hydrous RuO₂ having dimensions of 2.2 mm x 1.0 mm x 30 micrometers have been deposited in a planar configuration on gold current collectors. Rechargeable Zn/MnO₂ alkaline microbatteries comprising of MnO₂, Zn, an ethyl cellulose separator barrier layer and a KOH electrolyte have also been fabricated by MAPLE DW. The resulting structures with dimensions of 1.5 mm x 1.5 mm x 60 micrometers represent the first demonstration of a multilayer microbattery made by MAPLE DW. The performance of these prototypes are shown and the potential impact of MAPLE DW for the fabrication of novel microbattery systems for integrated power applications are discussed.

Proceedings Article | 6 November 2000 Paper

Matrix-assisted laser transfer of electronic materials for direct-write applications

Raymond C. Auyeung, H. Wu, R. Modi, Alberto Pique, J. Fitz-Gerald, Henry Young, Samuel Lakeou, Russell Chung, Douglas Chrisey

Proceedings Volume 4088, (2000) https://doi.org/10.1117/12.405735

KEYWORDS: Pulsed laser operation, Silver, Metals, Dielectrics, Resistors, Electronic components, Coating, Capacitors, Ultraviolet radiation, Laser applications

Read Abstract +

Proceedings Article | 7 June 2000 Paper

Direct writing of electronic materials using a new laser-assisted transfer/annealing technique

Alberto Pique, J. Fitz-Gerald, Douglas Chrisey, Raymond C. Auyeung, H. Wu, Samuel Lakeou, Robert McGill

Proceedings Volume 3933, (2000) https://doi.org/10.1117/12.387545

KEYWORDS: Silver, Annealing, Pulsed laser operation, Metals, Coating, Scanning electron microscopy, Glasses, Rapid manufacturing, Electronic components, Manufacturing

Read Abstract +

Proceedings Article | 7 June 2000 Paper

Effect of film thickness on the properties of indium tin oxide thin film grown by pulsed-laser deposition for organic light-emitting diodes

Heungsoo Kim, James Horwitz, Alberto Pique, Gary Kushto, Zakya Kafafi, C. Gilmore, Douglas Chrisey

Proceedings Volume 3933, (2000) https://doi.org/10.1117/12.387550

KEYWORDS: Oxygen, Scattering, Thin films, Organic light emitting diodes, Oxides, Tin, Glasses, Indium, Reflectivity, External quantum efficiency

Read Abstract +

Proceedings Article | 17 December 1999 Paper

Transparent conducting electrode materials grown by pulsed laser deposition for organic light-emitting devices

Huengsoo Kim, Alberto Pique, James Horwitz, Charles Merritt, Ruediger Schlaf, Zakya Kafafi, C. Gilmore, Douglas Chrisey

Proceedings Volume 3797, (1999) https://doi.org/10.1117/12.372722

KEYWORDS: Oxygen, Zinc oxide, Tin, Organic light emitting diodes, Glasses, Thin films, Aluminum, Crystals, Pulsed laser deposition, Transparent conductors

Read Abstract +

Proceedings Article | 15 July 1999 Paper

Laser direct writing of circuit elements and sensors

Alberto Pique, Douglas Chrisey, Raymond C. Auyeung, Samuel Lakeou, Russell Chung, Robert McGill, P. Wu, Michael Duignan, J. Fitz-Gerald, H. Wu

Proceedings Volume 3618, (1999) https://doi.org/10.1117/12.352695

KEYWORDS: Gold, Capacitors, Pulsed laser operation, Resistors, Polymers, Computer aided design, Metals, Electrodes, Composites, Dielectrics

Read Abstract +

Proceedings Article | 3 June 1998 Paper

Matrix-assisted pulsed-laser evaporation (MAPLE) of functionalized polymers: applications with chemical sensors

Robert McGill, Douglas Chrisey, Alberto Pique, Todd Mlsna

Proceedings Volume 3274, (1998) https://doi.org/10.1117/12.309520

KEYWORDS: Polymers, Molecules, Optical coatings, Pulsed laser operation, Chemical fiber sensors, Thin film coatings, FT-IR spectroscopy, Laser processing, Aerosols, Deposition processes

Read Abstract +

Proceedings Article | 1 July 1991 Paper

Growth of high-Tc superconducting thin films for microwave applications

Xin Wu, Stephen Foltyn, Ross Muenchausen, Robert Dye, D. Wayne Cooke, A. Rollett, A. Garcia, Nicholas Nogar, Alberto Pique, R. Edwards

Proceedings Volume 1477, (1991) https://doi.org/10.1117/12.45591

KEYWORDS: Sapphire, Superconductors, Thin films, Microwave radiation, Superconductivity, Infrared radiation, Oxygen, X-rays, Crystals, Diffraction

Read Abstract +

Showing 5 of 49 publications

Proceedings Volume Editor (8)

SPIE Conference Volume | 4 June 2018

Laser 3D Manufacturing V

SPIE Conference Volume | 2 May 2017

Laser 3D Manufacturing IV

SPIE Conference Volume | 7 July 2016

Laser 3D Manufacturing III

SPIE Conference Volume | 17 April 2015

Laser 3D Manufacturing II

SPIE Conference Volume | 19 March 2014

Laser 3D Manufacturing

Showing 5 of 8 publications

Conference Committee Involvement (47)

Laser 3D Manufacturing XII

25 January 2025 | San Francisco, California, United States

Laser 3D Manufacturing XI

30 January 2024 | San Francisco, California, United States

Laser 3D Manufacturing X

31 January 2023 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXVIII

30 January 2023 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXVII

25 January 2022 | San Francisco, California, United States

Laser 3D Manufacturing IX

25 January 2022 | San Francisco, California, United States

Laser 3D Manufacturing VIII

6 March 2021 | Online Only, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXVI

6 March 2021 | Online Only, California, United States

Laser 3D Manufacturing VII

4 February 2020 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXV

3 February 2020 | San Francisco, California, United States

Advanced Manufacturing Technologies for Micro- and Nanosystems in Security and Defence II

9 September 2019 | Strasbourg, France

Laser 3D Manufacturing VI

5 February 2019 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV

4 February 2019 | San Francisco, California, United States

Advanced Manufacturing Technologies for Micro- and Nanosystems in Security and Defence

10 September 2018 | Berlin, Germany

Laser 3D Manufacturing V

29 January 2018 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII

29 January 2018 | San Francisco, California, United States

Metamaterials, Metadevices, and Metasystems 2017

6 August 2017 | San Diego, California, United States

Laser 3D Manufacturing IV

30 January 2017 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII

30 January 2017 | San Francisco, California, United States

Metamaterials, Metadevices, and Metasystems 2016

28 August 2016 | San Diego, California, United States

Laser-based Micro- and Nanoprocessing X

16 February 2016 | San Francisco, California, United States

Laser 3D Manufacturing III

15 February 2016 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXI

15 February 2016 | San Francisco, California, United States

Laser 3D Manufacturing II

10 February 2015 | San Francisco, California, United States

Laser-based Micro- and Nanoprocessing IX

10 February 2015 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XX

9 February 2015 | San Francisco, California, United States

Laser 3D Manufacturing

5 February 2014 | San Francisco, California, United States

Laser-based Micro- and Nano-Processing VIII

5 February 2014 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XIX

3 February 2014 | San Francisco, California, United States

Laser-based Micro- and Nanopackaging and Assembly VII

5 February 2013 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVIII

4 February 2013 | San Francisco, California, United States

SPIE LASE

2 February 2013 | San Francisco, United States

Laser-based Micro- and Nanopackaging and Assembly VI

25 January 2012 | San Francisco, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVII

23 January 2012 | San Francisco, California, United States

SPIE LASE

21 January 2012 | San Francisco, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVI

24 January 2011 | San Francisco, California, United States

SPIE LASE

22 January 2011 | San Francisco, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing XV

25 January 2010 | San Francisco, California, United States

SPIE LASE

23 January 2010 | San Francisco, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing XIV

26 January 2009 | San Jose, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing XIII

21 January 2008 | San Jose, California, United States

Laser Applications in Microelectronic and Optoelectronic Manufacturing XII

22 January 2007 | San Jose, California, United States

Photonics North 2006

19 June 2006 | Quebec City, Canada

Laser Applications in Microelectronic and Optoelectronic Manufacturing IX

26 January 2004 | San Jose, Ca, United States

Laser Applications in Microelectronics and Optoelectronic Manufacturing VIII

27 January 2003 | San Jose, CA, United States

Photon Processing in Microelectronics and Photonics

21 January 2002 | San Jose, California, United States

Laser Plasma Generation and Diagnostics II

23 January 2001 | San Jose, CA, United States

Showing 5 of 47 Conference Committees

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years