Paper
7 February 2005 Study and design on a facilitated system of fiber grating sensor
Zhiguo Zhang, Kuiru Wang, Chongxiu Yu, Xu Wang, Binbin Yan
Author Affiliations +
Abstract
A facilitated fiber Bragg grating detection system for detecting temperature is presented. The scheme uses a processing fiber Bragg grating that is stuck on a cantilever beam and is identical to one used as a sensor to demodulate the temperature signal. A step motor that is controlled by PLC (Programmable Logic Controller) stretches the cantilever beam periodically, and the system of two gratings produces a carrier at this frequency with its phase modulated by the temperature signal applied to the sensing grating. The temperature signal, which is demodulated by this system, is transmitted to PC then processed and displayed in PC. This system’s configuration is simple, sensitivity is high, and cost is low.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhiguo Zhang, Kuiru Wang, Chongxiu Yu, Xu Wang, and Binbin Yan "Study and design on a facilitated system of fiber grating sensor", Proc. SPIE 5636, Holography, Diffractive Optics, and Applications II, (7 February 2005); https://doi.org/10.1117/12.580918
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Temperature metrology

Optical filters

Demodulation

Polymers

Signal detection

Back to Top