Paper
2 May 2006 Fully digital controlled A.C. servo engraving machine based on DEC4DA
Zhibing Shu, Xianfeng Chen, Hairong Zhang, Yiqun Huang, Caizhong Yan
Author Affiliations +
Proceedings Volume 6042, ICMIT 2005: Control Systems and Robotics; 60420B (2006) https://doi.org/10.1117/12.664525
Event: ICMIT 2005: Merchatronics, MEMS, and Smart Materials, 2005, Chongqing, China
Abstract
A novel engraving machine (NUT-1A) is presented, in which fully digital controlled AC system based on DEC4DA was used to improve the machining precision and sensitivity. This engraving machine was constructed around AC servo motor with encoder, controlled by a servo motor control card - DEC4DA. As the upper unit of AC servo motor, DEC4DA was a numerical control generator, which received pulses form CPU by ISA bus, and these pulses were amplified and converted to drive AC servo actuator. This novel engraving machine can achieve a higher positioning accuracy of ±0.01mm and positioning repetition of ±0.005mm, and its resolution is 0.001mm/0.0001mm. Moreover, because of multi-closed loops were used in the system, the steady and transient performances are more excellent. This system ensures a much quicker current regulation in closed-loop operation, of acceleration and braking in both directions, as well as stable speed characteristics. Amplifier boards are protected against excessive current, excessive temperature and short circuiting of the motor supply cables.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhibing Shu, Xianfeng Chen, Hairong Zhang, Yiqun Huang, and Caizhong Yan "Fully digital controlled A.C. servo engraving machine based on DEC4DA", Proc. SPIE 6042, ICMIT 2005: Control Systems and Robotics, 60420B (2 May 2006); https://doi.org/10.1117/12.664525
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Servomechanisms

Control systems

Laser engraving

Amplifiers

Switches

Digital signal processing

Motion controllers

Back to Top