Paper
6 July 2006 High efficiency germanium immersion gratings
Paul J. Kuzmenko, Pete J. Davis, Steve L. Little, Liesl M. Little, Jay V. Bixler
Author Affiliations +
Abstract
We have fabricated several germanium immersion gratings by single crystal, single point diamond flycutting on an ultra-precision lathe. Use of a dead sharp tool produces groove corners less than 0.1 micron in radius and consequently high diffraction efficiency. We measured first order efficiencies in immersion of over 80% at 10.6 micron wavelength. Wavefront error was low averaging 0.06 wave rms (at 633 nm) across the full aperture. The grating spectral response was free of ghosts down to our detection limit of 1 part in 104. Scatter should be low based upon the surface roughness. Measurement of the spectral line profile of a CO2 laser sets an upper bound on total integrated scatter of 0.5%.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul J. Kuzmenko, Pete J. Davis, Steve L. Little, Liesl M. Little, and Jay V. Bixler "High efficiency germanium immersion gratings", Proc. SPIE 6273, Optomechanical Technologies for Astronomy, 62733T (6 July 2006); https://doi.org/10.1117/12.670565
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction gratings

Germanium

Diffraction

Diamond

Spectrometers

Laser scattering

Wavefronts

Back to Top