Paper
15 March 2007 EUVL mask substrate defect print study
Jerry Cullins, Yoshihiro Tezuka, Iwao Nishiyama, Takeo Hashimoto, Tsutomu Shoki
Author Affiliations +
Abstract
Mask substrate defects continue to be one of the critical issues for EUV technology development. Current specifications call for allowable defects in the 25nm height range for production masks blanks. Simulations seem to indicate that defects as small as 3nm high will cause printable defects on the wafer. To study the effects of small aspect defects on the printed image we undertook a study to look at 10nm height (mask substrate size) defects. A mask was fabricated with 12nm height defects in arrays based on area. Defects of 110nm, 190nm, 300nm, and 1000nm were fabricated. Multi-layers were then deposited and the mask was patterned with line/space patterns with pitches (mask size) of 600nm, 800nm, and 1000nm. Wafers were then exposed using a well characterized resist and the results were analyzed. All sizes of defects printed at least once. The largest defect size (1000nm mask) caused multiple bridges to form while even the smallest defect size (110nm mask) could cause a bridge on the 600nm (mask size) pitch.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jerry Cullins, Yoshihiro Tezuka, Iwao Nishiyama, Takeo Hashimoto, and Tsutomu Shoki "EUVL mask substrate defect print study", Proc. SPIE 6517, Emerging Lithographic Technologies XI, 65170E (15 March 2007); https://doi.org/10.1117/12.714358
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Semiconducting wafers

Extreme ultraviolet lithography

Printing

Bridges

Atomic force microscopy

Extreme ultraviolet

Back to Top