Paper
1 December 2008 Improving sidewall profile metrology with enhanced 3D-AFM
Author Affiliations +
Proceedings Volume 7140, Lithography Asia 2008; 71400H (2008) https://doi.org/10.1117/12.804482
Event: SPIE Lithography Asia - Taiwan, 2008, Taipei, Taiwan
Abstract
Critical dimension atomic force microscope (CD-AFM or 3D-AFM) is an important metrology technique for full three-dimensional measurements of linewidth CD and sidewall shape. Recent improvements in the 3D-AFM platform design, including high-precision/low-drift sample stages and high resolution optics, have been coupled with 'enhanced CD' (eCD) scan mode and novel AFM tip design. Especially, the eCD mode features a fast scanning actuator system (FA) and a bottom corner transitional rescan algorithm (TRS). The actuation system utilizes high gain feedback electronics and high bandwidth piezoelectric actuator to pull away a slender tip much faster from a small trench sidewall. The transitional rescan algorithm detects a rising sidewall before rescanning the transition for better bottom corner profiling. The paper presents evaluation data to show these enhancements resulted in improved measurement capability for small trenches required for shrinking device size, better sidewall profiling, more accurate bottom CD and LWR/LER measurement, faster scan speed, and less tip wear [1]. All the improvements ensure 3D-AFM continues to have the lowest measurement uncertainty among all other dimension metrology techniques.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tianming Bao, Lars Mininni, and Dean Dawson "Improving sidewall profile metrology with enhanced 3D-AFM", Proc. SPIE 7140, Lithography Asia 2008, 71400H (1 December 2008); https://doi.org/10.1117/12.804482
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metrology

Atomic force microscopy

Line edge roughness

Line width roughness

Scanners

Critical dimension metrology

Actuators

Back to Top