Paper
25 November 2009 Investigation on the aging characteristics of high-power white LEDs under different stresses
Jing Yan, Zhendong Shang, Jianxin Chen
Author Affiliations +
Proceedings Volume 7635, Display, Solid-State Lighting, Photovoltaics, and Optoelectronics in Energy; 76350B (2009) https://doi.org/10.1117/12.852010
Event: Asia Communications and Photonics, 2009, Shanghai, Shanghai , China
Abstract
We used two types of 1-W white LEDs, both of which had the structure of GaN chip with phosphor covered and packaged in metal PCB boards with laminated aluminum. Of the two types of packaging lens, one is made of hard silica gel, and the other is made of soft plastic. The purpose of this paper is to analyze the aging characters of high-power white LEDs under stresses. In accelerated life tests, the two types of white LEDs were treated with high temperature and DC current distinctively. The tendencies of the decay of luminous flux in the two conditions were basically the same, while the changing trends of the color temperature were different. The hard silica gel had better stability.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jing Yan, Zhendong Shang, and Jianxin Chen "Investigation on the aging characteristics of high-power white LEDs under different stresses", Proc. SPIE 7635, Display, Solid-State Lighting, Photovoltaics, and Optoelectronics in Energy, 76350B (25 November 2009); https://doi.org/10.1117/12.852010
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Packaging

Reliability

Manufacturing

Temperature metrology

Silica

Accelerated life testing

RELATED CONTENT

Lifetime evaluation of CMOS mixed signal devices
Proceedings of SPIE (October 24 2012)
A silicon wafer packaging solution for HB-LEDs
Proceedings of SPIE (September 26 2007)
Novel hermetic packaging methods for MOEMS
Proceedings of SPIE (January 16 2003)
Bad vias are the cause for electrical test yield losses...
Proceedings of SPIE (August 28 1998)

Back to Top