Paper
18 March 2013 TiO2 thin film transistor by atomic layer deposition
Author Affiliations +
Proceedings Volume 8626, Oxide-based Materials and Devices IV; 862616 (2013) https://doi.org/10.1117/12.2005528
Event: SPIE OPTO, 2013, San Francisco, California, United States
Abstract
In this study, TiO2 films were deposited using thermal Atomic Layer Deposition (ALD) system. It is observed that asdeposited ALD TiO2 films are amorphous and not suitable as TFT channel material. In order to use the film as channel material, a post-annealing process is needed. Annealed films transform into a polycrystalline form containing mixed anatase and rutile phases. For this purpose, devices are annealed at 475°C and observed that their threshold voltage value is 6.5V, subthreshold slope is 0.35 V/dec, Ion/Ioff ratios 2.5×106 and mobility value is 0.672 cm2/V.s. Optical response measurements showed that devices exhibits decent performance at ultraviolet region where TiO2 has band to band absorption mechanism.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ali K. Okyay, Feyza Oruç, Furkan Çimen, and Levent E. Aygün "TiO2 thin film transistor by atomic layer deposition", Proc. SPIE 8626, Oxide-based Materials and Devices IV, 862616 (18 March 2013); https://doi.org/10.1117/12.2005528
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Titanium dioxide

Atomic layer deposition

Thin films

Measurement devices

Transistors

Annealing

Absorption

Back to Top