Paper
14 November 2013 Laser-induced damage density of thick optical components
Author Affiliations +
Abstract
The determination of surface damage densities of thick optical components is tricky due to the occurrence of non-linear effects (Brillouin and Kerr) that affect the beam propagation through the optics. It is then compulsory to record the beam parameters, mainly the temporal profile, in order to predict and calculate fluence and/or intensity on the rear surface taking into account the non-linear beam propagation. Experiments have been realised with the use of large beams and several phase modulations were activated, leading to numerous peak intensities due to the occurrence of temporal amplitude modulations. Results are first compared in the case of thin optics in order to separate the intrinsic absorptions by the defects which are the weak points of the optics to the effect of the non-linear propagation. The correspondence between the length of the filaments and the beam parameters has been realised in order to highlight the relevant beam parameters that have to be considered for the damage test of thick optics. The whole of measurements and modeling permit us to measure more accurately the rear surface damage of thick optics due to intrinsic defects.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. Lamaignère, T. Donval, R. Diaz, and R. Courchinoux "Laser-induced damage density of thick optical components", Proc. SPIE 8885, Laser-Induced Damage in Optical Materials: 2013, 88851Q (14 November 2013); https://doi.org/10.1117/12.2030397
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Phase modulation

Laser induced damage

Optical components

Nonlinear optics

Silica

Beam propagation method

Laser beam propagation

Back to Top