Reflectance colorimetry measurement system using scanning spectrometer with array detector

Ruoduan Sun; Yu Ma; Caihong Dai; Xiaju Chen

doi:10.1117/12.2034726

21 August 2013 Reflectance colorimetry measurement system using scanning spectrometer with array detector

Ruoduan Sun, Yu Ma, Caihong Dai, Xiaju Chen

Proceedings Volume 8908, International Symposium on Photoelectronic Detection and Imaging 2013: Imaging Sensors and Applications; 890822 (2013) https://doi.org/10.1117/12.2034726
Event: ISPDI 2013 - Fifth International Symposium on Photoelectronic Detection and Imaging, 2013, Beijing, China

Abstract

A reflectance colorimetry measurement system is constructed using scanning spectrometer with array detector, and the color measurement can be achieved under 45:0 and 0:45 geometry conditions. Typically, there are two types of spectrometer for colorimetry measurement: the scanning spectrometer with single-channel detector requires point-by-point spectral reading, and the measurement is time consuming; array sensor spectrometer (multichannel spectrometer) can completes the measurement in a few milliseconds, but its spectral resolution and range are limited by the array sensor and the optical elements. This colorimetry measurement system is designed for color calibration service, it using a scanning spectrometer with array detector, which divides the board spectral measurement range into sections, and uses the array detector to measure each section respectively, thus achieving the rapid measurement of spectral data with high resolution and wide wavelength range, so as to realized fast color measurement with high precision. The array sensor of the system using a photo diode array (PDA) with 1024 pixel, having a larger dynamic range and better linearity compared to CCD. The grating is rotated with a precision rotation stage, and the rotation angle is calculated basing the parameters of grating and collimator lens, so as to stitch the spectral data of each measurement section., the measurement signal is mutated at the junction point between measurement sections, due to the rotation angle and the shape of grating efficiency curve. The theoretical analysis and experiment shows that the signal mutation at the junction point can be eliminated by comparison measurement of reflectance.

Citation Download Citation

Ruoduan Sun, Yu Ma, Caihong Dai, and Xiaju Chen "Reflectance colorimetry measurement system using scanning spectrometer with array detector", Proc. SPIE 8908, International Symposium on Photoelectronic Detection and Imaging 2013: Imaging Sensors and Applications, 890822 (21 August 2013); https://doi.org/10.1117/12.2034726

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available