Characterization and mitigation of overlay error on silicon wafers with nonuniform stress

T. Brunner; V. Menon; C. Wong; N. Felix; M. Pike; O. Gluschenkov; M. Belyansky; P. Vukkadala; S. Veeraraghavan; S. Klein; C. H. Hoo; J. Sinha

doi:10.1117/12.2045715

31 March 2014 Characterization and mitigation of overlay error on silicon wafers with nonuniform stress

T. Brunner, V. Menon, C. Wong, N. Felix, M. Pike, O. Gluschenkov, M. Belyansky, P. Vukkadala, S. Veeraraghavan, S. Klein, C. H. Hoo, J. Sinha

Author Affiliations +

Proceedings Volume 9052, Optical Microlithography XXVII; 90520U (2014) https://doi.org/10.1117/12.2045715
Event: SPIE Advanced Lithography, 2014, San Jose, California, United States

Abstract

Process-induced overlay errors are a growing problem in meeting the ever-tightening overlay requirements for integrated circuit production. While uniform process-induced stress is easily corrected, non-uniform stress across the wafer is much more problematic, often resulting in non-correctable overlay errors. Measurements of the wafer geometry of free, unchucked wafers give a powerful method for characterization of such non-uniform stress. We will describe a Patterned Wafer Geometry (PWG) tool, which uses optical methods to measure the geometry of in-process wafers. PWG data can be related to In-Plane Distortion (IPD) of the wafer through the PIR (Predicted IPD Residual) metric. This paper will explore the relationship between the PIR data and measured overlay data on Engineered Stress Monitor (ESM) wafers containing various designed stress variations. The process used to fabricate ESM wafers is quite versatile and can mimic many different stress variation signatures. For this study, ESM wafers were built with strong across-wafer stress variation and another ESM wafer set was built with strong intrafield stress variation. IPD was extensively characterized in two different ways: using standard overlay error metrology and using PWG metrology. Strong correlation is observed between these two independent sets of data, indicating that the PIR metric is able to clearly see wafer distortions. We have taken another step forward by using PIR data from the PWG tool to correct process-induced overlay error by feedforward to the exposure tool, a novel method that we call PWG-FF. We conclude that appropriate wafer geometry measurements of in-process wafers have strong potential to characterize and reduce process-induced overlay errors.

Citation Download Citation

T. Brunner, V. Menon, C. Wong, N. Felix, M. Pike, O. Gluschenkov, M. Belyansky, P. Vukkadala, S. Veeraraghavan, S. Klein, C. H. Hoo, and J. Sinha "Characterization and mitigation of overlay error on silicon wafers with nonuniform stress", Proc. SPIE 9052, Optical Microlithography XXVII, 90520U (31 March 2014); https://doi.org/10.1117/12.2045715

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available