Paper
2 June 2014 Comparison of the fiber optic dosimeter and semiconductor dosimeter for use in diagnostic radiology
W. J. Yoo, S. H. Shin, H. I. Sim, S. Hong, S. G. Kim, J. S. Jang, J. S. Kim, H. S. Jeon, G. W. Kwon, K. W. Jang, S. Cho, B. Lee
Author Affiliations +
Proceedings Volume 9157, 23rd International Conference on Optical Fibre Sensors; 915745 (2014) https://doi.org/10.1117/12.2058428
Event: OFS2014 23rd International Conference on Optical Fiber Sensors, 2014, Santander, Spain
Abstract
A fiber-optic dosimeter (FOD) was fabricated using a plstic scintillating fiber, a plastic optical fiber, and a multi-pixel photon counter to measure entrance surface dose (ESD) in diagnostic radiology. Under changing tube current and irradition time of the digital radiography (DR) system, we measured the scintillating light and the ESD simultaneously. As experiemtnal results, the total counts of the FOD were changed in a manner similar to the ESDs of the semiconductor dosimeter (SCD). In conclusion, we demonstrated that the proposed FOD minimally affected the diagnostic information of DR image while the SCD caused serious image artifacts.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W. J. Yoo, S. H. Shin, H. I. Sim, S. Hong, S. G. Kim, J. S. Jang, J. S. Kim, H. S. Jeon, G. W. Kwon, K. W. Jang, S. Cho, and B. Lee "Comparison of the fiber optic dosimeter and semiconductor dosimeter for use in diagnostic radiology", Proc. SPIE 9157, 23rd International Conference on Optical Fibre Sensors, 915745 (2 June 2014); https://doi.org/10.1117/12.2058428
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Single crystal X-ray diffraction

Diagnostics

Radiology

Point spread functions

Semiconductors

Fiber optics

Phase only filters

Back to Top