Frequency stabilized lasers for space applications

Mike Lieber; Mike Adkins; Robert Pierce; Robert Warden; Cynthia Wallace; Carl Weimer

doi:10.1117/12.2060330

17 September 2014 Frequency stabilized lasers for space applications

Mike Lieber, Mike Adkins, Robert Pierce, Robert Warden, Cynthia Wallace, Carl Weimer

Proceedings Volume 9226, Nanophotonics and Macrophotonics for Space Environments VIII; 922605 (2014) https://doi.org/10.1117/12.2060330
Event: SPIE Optical Engineering + Applications, 2014, San Diego, California, United States

Abstract

metrology, spectroscopy, atomic clocks and geodesy. This technology will be a key enabler to several proposed NASA science missions. Although lasers such as Q-switched Nd-YAG are now commonly used in space, other types of lasers - especially those with narrow linewidth - are still few in number and more development is required to advance their technology readiness. In this paper we discuss a reconfigurable laser frequency stabilization testbed, and end-to-end modeling to support system development. Two important features enabling testbed flexibility are that the controller, signal processing and interfaces are hosted on a field programmable gate array (FPGA) which has spacequalified equivalent parts, and secondly, fiber optic relay of the beam paths. Given the nonlinear behavior of lasers, FPGA implementation is a key system reliability aspect allowing on-orbit retuning of the control system and initial frequency acquisition. The testbed features a dual sensor system, one based upon a high finesse resonator cavity which provides relative stability through Pound-Drever-Hall (PDH) modulation and secondly an absolute frequency reference by dither locking to an acetylene gas cell (GC). To provide for differences between ground and space implementation, we have developed an end-to-end Simulink/ Matlab^®-based control system model of the testbed components including the important noise sources. This model is in the process of being correlated to the testbed data which then can be used for trade studies, and estimation of space-based performance and sensitivities. A 1530 nm wavelength semiconductor laser is used for this initial work.

Citation Download Citation

Mike Lieber, Mike Adkins, Robert Pierce, Robert Warden, Cynthia Wallace, and Carl Weimer "Frequency stabilized lasers for space applications", Proc. SPIE 9226, Nanophotonics and Macrophotonics for Space Environments VIII, 922605 (17 September 2014); https://doi.org/10.1117/12.2060330

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available