Paper
19 February 2015 Design and analysis of AlGaInP-based light emitting diodes with SiO2 current blocking layer
Li Ma, Guang-di Shen, Chen Xu, Zhi-Yuan Gao
Author Affiliations +
Proceedings Volume 9449, The International Conference on Photonics and Optical Engineering (icPOE 2014); 94491R (2015) https://doi.org/10.1117/12.2083261
Event: The International Conference on Photonics and Optical Engineering and the Annual West China Photonics Conference (icPOE 2014), 2014, Xi'an, China
Abstract
In this study, the fabrication and characterization of AlGaInP-based light-emitting diodes (LEDs) with further improvement by the design of a SiO2 current blocking layer were described. It was found that with the SiO2 CBL, the injected current can be forced to spread outside instead of flowing directly downward under the p-pad electrode. At 20mA, as compared to traditional LEDs, the optical output power for novel LEDs is increased by about 30%. We found that the novel LEDs have better saturation characteristics, this improvement is contributed to more uniform of injection current and less heat generation in the novel LED chips.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Li Ma, Guang-di Shen, Chen Xu, and Zhi-Yuan Gao "Design and analysis of AlGaInP-based light emitting diodes with SiO2 current blocking layer", Proc. SPIE 9449, The International Conference on Photonics and Optical Engineering (icPOE 2014), 94491R (19 February 2015); https://doi.org/10.1117/12.2083261
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Electrodes

Silica

Gallium arsenide

Aluminium gallium indium phosphide

Absorption

Cladding

RELATED CONTENT


Back to Top