Paper
16 March 2016 Stabilization of two frequency combs with a small relative fceo jitter using diode laser injection locking
Author Affiliations +
Abstract
We report a novel stabilization method for two frequency combs with a small relative fceo jitter using a selected single optical mode out of a frequency comb. This proposed method is intended to stabilize optical frequencies which generated by two different optical combs with immunity to environmental disturbance, frequency drift and fluctuation with time so as to enhance the measuring performance of dual comb based spectroscopy and distance measurement. A single comb mode is selected out using a composite optical filtering and diode laser injection locking. The selected optical frequency yields a narrow relative linewidth less than 1 Hz and the frequency stability of 1.58×10-17 at 10 s averaging time. By using this, we generated heterodyned beat signal between generated optical frequency and another comb to stabilize relative fceo using phase lock-in control which adjust driving frequency of acousto-optic modulator. As a result of feedback control, the relative jitter is well stabilized down to 1.06×10-15 at 10 s averaging time. This highly stable frequency instability of two combs can perform to enhance the measuring resolution, accuracy and repeatability for dual comb based spectroscopy and distance metrology.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Byung Jae Chun, Young-Jin Kim, and Seung-Woo Kim "Stabilization of two frequency combs with a small relative fceo jitter using diode laser injection locking", Proc. SPIE 9754, Photonic Instrumentation Engineering III, 97540O (16 March 2016); https://doi.org/10.1117/12.2212838
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Frequency combs

Bragg cells

Optical filters

Laser stabilization

Interferometers

Fiber Bragg gratings

Signal to noise ratio

Back to Top