Design and fabrication of an electro-thermal microactuator with multidirectional in-plane motion

Chi Hsiang Pan; Chia-Lung Chang; Yi-Kun Chen

doi:10.1117/1.2040448

1 July 2005 Design and fabrication of an electro-thermal microactuator with multidirectional in-plane motion

Chi Hsiang Pan, Chia-Lung Chang, Yi-Kun Chen

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 4, Issue 3, 033008 (July 2005). https://doi.org/10.1117/1.2040448

Abstract

We present a new electro-thermal microactuator with multidirectional in-plane motion by selectively applying a single potential across two of four contacts. The design principle is based on the asymmetrical thermal expansion of the structure with 1. different lengths and widths of the beams, 2. varying resistivities of the beams by selectively doping, and 3. rigorous control of the thermal boundary conditions. Analytical models are derived to describe the electro-thermo-mechanical performances of the actuator. The commercial finite element package ANSYS is used to demonstrate the feasibility of the design, to verify the analytical results, and to characterize the actuator in details under complex heat transfer conditions. The design parameters that significantly affect the performance of the actuator are discussed, including the structural dimension, selective doping, and heat transfer condition. Conventional silicon-based micromachining techniques compatible with IC processes are used to fabricate the microactuator. The phosphorous-doped polycrystalline silicon film by low pressure chemical vapor deposition (LPCVD) is used to demonstrate the effectiveness of the microactuator. In conclusion, it is found that input voltages ≤7 V are required for the microactuator to achieve the maximum displacement in 8 µm and the maximum tip force in 8 µN with the operating temperature below 300 °C, the power as low as 10 mW, and the response time about 30 msec in average.

©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Chi Hsiang Pan, Chia-Lung Chang, and Yi-Kun Chen "Design and fabrication of an electro-thermal microactuator with multidirectional in-plane motion," Journal of Micro/Nanolithography, MEMS, and MOEMS 4(3), 033008 (1 July 2005). https://doi.org/10.1117/1.2040448

Published: 1 July 2005

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE