Impact of a deformed extreme ultraviolet pellicle in terms of the critical dimension uniformity

In-Seon Kim; Michael Yeung; Eytan Barouch; Hye-Keun Oh

doi:10.1117/1.JMM.15.2.021003

29 January 2016 Impact of a deformed extreme ultraviolet pellicle in terms of the critical dimension uniformity

In-Seon Kim, Michael Yeung, Eytan Barouch, Hye-Keun Oh

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 15, Issue 2, 021003 (January 2016). https://doi.org/10.1117/1.JMM.15.2.021003

Abstract

The usage of an extreme ultraviolet (EUV) pellicle is regarded as a potential solution for defect control because it can protect the mask from airborne debris. However, some obstacles disrupt realistic application of the pellicle, such as its structural weakness, the risk of thermal damage, and so on. For these reasons, flawless fabrication of the pellicle is impossible. We discuss the influence of a deformed pellicle in terms of the nonuniform intensity distribution and the critical dimension (CD) uniformity. When we consider a 16-nm periodic pattern with dipole illumination, a transmission difference (max-min) of 0.7% causes CD uniformity of 0.1 nm. The deflection of the aerial image caused by gravity is small enough to ignore. CD uniformity is <0.1 nm, even for the current gap of 2 mm between the mask and pellicle. However, wrinkling of the EUV pellicle, caused by heat, can cause serious image distortion because a wrinkled EUV pellicle experiences both transmission loss variation as well as CD nonuniformity. The local angle of a wrinkle (as opposed to the period or amplitude of a wrinkle) is the main factor that influences CD uniformity, and a local angle of <∼16 deg is needed to achieve 0.1-nm CD uniformity for a 16-nm L/S pattern.

Citation Download Citation

In-Seon Kim, Michael Yeung, Eytan Barouch, and Hye-Keun Oh "Impact of a deformed extreme ultraviolet pellicle in terms of the critical dimension uniformity," Journal of Micro/Nanolithography, MEMS, and MOEMS 15(2), 021003 (29 January 2016). https://doi.org/10.1117/1.JMM.15.2.021003

Published: 29 January 2016

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available