1 July 2004 Patterning of optical coatings by laser ablation for the fabrication of dielectric masks and diffractive phase elements
Jürgen Ihlemann, Dirk Schäfer
Author Affiliations +
Abstract
Excimer laser ablation is a versatile method to generate 2- or 3-D microstructured devices for mechanics, fluidics, and optics. Particularly, if in 1-D the structure is predefined by a layer design, and the other two dimensions are defined in the layer ablation process by mask projection, very precise structure definition in three dimensions and ablated surfaces with optical quality can be achieved. By patterning optical layers or layer stacks, a variety of applications is possible. Two examples are demonstrated. 1. Dielectric masks (amplitude masks) are fabricated by structuring a highly reflective dielectric layer stack. These masks can be used in high power laser machining systems. 2. Diffractive optical elements (phase elements) are generated by structured ablation of a transparent layer. The performance of these elements in shaping excimer laser beams is demonstrated.
©(2004) Society of Photo-Optical Instrumentation Engineers (SPIE)
Jürgen Ihlemann and Dirk Schäfer "Patterning of optical coatings by laser ablation for the fabrication of dielectric masks and diffractive phase elements," Journal of Micro/Nanolithography, MEMS, and MOEMS 3(3), (1 July 2004). https://doi.org/10.1117/1.1759328
Published: 1 July 2004
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Dielectrics

Photomasks

Optical lithography

Excimer lasers

Optical components

Laser processing

RELATED CONTENT

Excimer laser micromachining based on dielectric masks
Proceedings of SPIE (November 04 1994)
Excimer laser deep microstructuring for LIGA process
Proceedings of SPIE (August 15 1998)
Low-cost mask for excimer laser projection ablation
Proceedings of SPIE (December 27 1996)
Chromium Mask Damage In Excimer Laser Projection Processing
Proceedings of SPIE (January 01 1988)
Laser ablation patterning of layered systems a method to...
Proceedings of SPIE (January 17 2003)

Back to Top