1 February 2008 Input couplers for thin light-guides and light-emitting diodes
Toshitaka Murata, Ichiro Fujieda
Author Affiliations +
Abstract
As the demand toward a thin liquid crystal display accelerates, a backlight system must become thinner. Compact and efficient coupling of an LED to a thin light-guide is one of the key technologies. First, we consider simple face-down and prism coupling, and carry out experiments using a chip-type LED with a 2.4-mm-diam emission area and a 3.0-mm-thick light-guide. Face-down coupling guides only 12% of the LED output into the light-guide. With a right-angle prism, the efficiency is improved to 23%. We try to improve the coupling efficiency by altering the propagation direction of the light with an optical film. However, our experiments and simulations with off-the-shelf prism sheets and diffuser films show that the coupling efficiency decreases. Next, we carry out ray-tracing simulations for various input coupler designs. A chip-type LED with a 0.42-mm-diam emission area and a 0.1-mm-thick light-guide are assumed. Calculated efficiency greater than 50% is obtained by a square prism mounted obliquely on the light-guide, while the footprint of the coupler is about 1.3 mm. An input coupler based on an oblique cylinder improves the calculated efficiency to 73.5% at the expense of its footprint of 4.82 mm.
©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
Toshitaka Murata and Ichiro Fujieda "Input couplers for thin light-guides and light-emitting diodes," Optical Engineering 47(2), 027001 (1 February 2008). https://doi.org/10.1117/1.2838592
Published: 1 February 2008
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications and 21 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Prisms

Geometrical optics

LCDs

Optical engineering

Detector arrays

Optics manufacturing

RELATED CONTENT

Hollow backlight parametric study
Proceedings of SPIE (December 17 2014)
Diffuser array for a light-emitting diode backlight system
Proceedings of SPIE (September 18 2007)
Direct LED backlight for large area LCD TVs brightness...
Proceedings of SPIE (September 14 2007)
Design and fabrication of an ultra slim light guide for...
Proceedings of SPIE (November 15 2010)

Back to Top