The Earth 2.0 (ET) space mission has entered its phase B study in China. It seeks to understand how frequently habitable Earth-like planets orbit solar-type stars (Earth 2.0s), the formation and evolution of terrestrial-like planets, and the origin of free-floating planets. The final design of ET includes six 28 cm diameter transit telescope systems, each with a field of view of 550 square degrees, and one 35 cm diameter microlensing telescope with a field of view of 4 square degrees. In transit mode, ET will continuously monitor over 2 million FGKM dwarfs in the original Kepler field and its neighboring fields for four years. Simultaneously, in microlensing mode, it will observe over 30 million I < 20.5 stars in the Galactic bulge direction. Simulations indicate that ET mission could identify approximately 40,000 new planets, including about 4,000 terrestrial-like planets across a wide range of orbital periods and in the interstellar space, ~1000 microlensing planets, ~10 Earth 2.0s and around 25 free-floating Earth mass planets. Coordinated observations with ground-based KMTNet telescopes will enable the measurement of masses for ~300 microlensing planets, helping determine the mass distribution functions of free-floating planets and cold planets. ET will operate from the Earth-Sun L2 halo orbit with a designed lifetime exceeding 4 years. The phase B study involves detailed design and engineering development of the transit and microlensing telescopes. Updates on this mission study are reported.
A space mission called “Earth 2.0 (ET)” is being developed in China to address a few of fundamental questions in the exoplanet field: How frequently habitable Earth-like planets orbit solar type stars (Earth 2.0s)? How do terrestrial planets form and evolve? Where did floating planets come from? ET consists of six 30 cm diameter transit telescope systems with each field of view of 500 square degrees and one 35 cm diameter microlensing telescope with a field of view of 4 square degrees. The ET transit mode will monitor ~1.2M FGKM dwarfs in the original Kepler field and its neighboring fields continuously for four years while the microlensing mode monitors over 30M I< 20.6 stars in the Galactic bulge direction. ET will merge its photometry data with that from Kepler to increase the time baseline to 8 years. This enhances the transit signal-to-noise ratio, reduce false positives, and greatly increases the chance to discover Earth 2.0s. Simulations show that ET transit telescopes will be able to identify ~17 Earth 2.0s, about 4,900 Earth-sized terrestrial planets and about 29,000 new planets. In addition, ET will detect about 2,000 transit-timingvariation (TTV) planets and 700 of them will have mass and eccentricity measurements. The ET microlensing telescope will be able to identify over 1,000 microlensing planets. With simultaneous observations with the ground-based KMTNet telescopes, ET will be able to measure masses of over 300 microlensing planets and determine the mass distribution functions of free-floating planets and cold planets. ET will be operated at the Earth-Sun L2 orbit with a designed lifetime longer than 4 years.
Star sensor is an essential component of spacecraft attitude control system. Spatial radiation can cause star sensor performance degradation, abnormal work, attitude measurement accuracy and reliability reduction. Many studies have already been dedicated to the radiation effect on Charge-Coupled Device(CCD) image sensor, but fewer studies focus on the radiation effect of star sensor. The innovation of this paper is to study the radiation effects from the device level to the system level. The influence of the degradation of CCD image sensor radiation sensitive parameters on the performance parameters of star sensor is studied in this paper. The correlation among the radiation effect of proton, the non-uniformity noise of CCD image sensor and the performance parameter of star sensor is analyzed. This paper establishes a foundation for the study of error prediction and correction technology of star sensor on-orbit attitude measurement, and provides some theoretical basis for the design of high performance star sensor.
InP/InGaAs DHBTs and frequency dividers are irradiated by low energy proton, and displacement damage effect of the devices are analyzed. InP/InGaAs DHBTs has been made DC characteristics measurements, and the function measurement for frequency dividers has been done both before and after proton irradiation. The breakdown voltage of InP DHBTs drop to 3.7V When the fluence up to 5x1013 protons/cm2. Meanwhile, the function of frequency dividers get out of order. Degradation of DC characteristics of DHBTs are due to the radiation-induced defects in the quasi neutral base and the space charge region of base-collector and base-emitter junctions. The performance deterioration of DHBTs induce the fault of frequency dividers, and prescaler may be the most sensitive circuit.
The radiation effects of protons will lead to degradation of dark signal of CCD. The degradation mechanism of dark signals of CCD are different due to the different proton energy. This paper investigated the radiation effects and annealing effects of CCD exposed to 3MeV and 10MeV proton. The test result shown that 3MeV proton irradiation induced CCD’s dark signal decreasing linearly following the proton fluence. The dark signal degradation induced by 10MeV was not linearly, due to the different defects introduced by proton with different energy. The results above indicates that the displacement damage behavior of defects introduced by 10MeV proton is more complex than 3MeV proton. There are more than two kinds of displacement damage defects dominating the increase of the dark signal. The results of this paper provided important reference for CCD’s proton radiation test method and evaluation technology.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.