The Center for High Angular Resolution Astronomy (CHARA) Array currently consists of 6 telescopes at fixed positions, connected by vacuum pipes to the delay lines. The CHARA Michelson Array Pathfinder (CMAP) project includes two major components: 1) a mobile telescope that can be placed at a number of locations, and 2) a fiber optic relay system to transport light to the beam combining facility. The telescope will be equipped with a custom-built instrument bench with adaptive optics and fiber injection. The light will be transported by optical fibers to the existing CHARA delay lines. In this contribution, we present the progress on the various subsystems needed to integrate the new telescope and beam transport method into the existing CHARA environment. We will also describe our efforts to find internal fringes with the new fibers.
Much research has been done to show the possibilities of using long transport fibers in optical interferometry. The CHARA Michelson Array Pathfinder will extend the spatial coverage of the CHARA Array by adding a mobile 1-meter telescope connected by optical fibers. The pathfinder will operate in H-band and will explore baselines up to approximately 1 km, giving an angular resolution of 0.2 mas. The new telescope will be placed at short baselines to image the surfaces of large stars and at long baselines to resolve small stars. Here we describe the project and our progress on various subsystems.
The CHARA Array is an optical/infrared interferometer that combines the light from six 1-meter telescopes. With baselines ranging from 34 to 331 meters, CHARA provides sub-milliarcsecond resolution to measure stellar diameters, image stellar surfaces, resolve close binary companions, and study circumstellar environments. In this paper, we present recent highlights from the CHARA Array, focusing on the implementation of adaptive optics, the ongoing development of next generation beam combiners, an update on the community access program, and a discussion about future developments.
In this contribution we report on our work to increase the spectral range of the Michigan Infrared Combiner- eXeter (MIRC-X) instrument at the CHARA array to allow for dual H and J band interferometric observations. We comment on the key science drivers behind this project and the methods of characterisation and correction of instrumental birefringence and dispersion. In addition, we report on the first results from on-sky commissioning in November 2019.
The CHARA Array is the longest baseline optical interferometer in the world. Operated with natural seeing, it has delivered landmark sub-milliarcsecond results in the areas of stellar imaging, binaries, and stellar diameters. However, to achieve ambitious observations of faint targets such as young stellar objects and active galactic nuclei, higher sensitivity is required. For that purpose, adaptive optics are developed to correct atmospheric turbulence and non-common path aberrations between each telescope and the beam combiner lab. This paper describes the AO software and its integration into the CHARA system. We also report initial on-sky tests that demonstrate an increase of scientific throughput by sensitivity gain and by extending useful observing time in worse seeing conditions. Our 6 telescopes and 12 AO systems with tens of critical alignments and control loops pose challenges in operation. We describe our methods enabling a single scientist to operate the entire system.
CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) is currently being developed at Observatoire de la Cote d’Azur. It will be installed at the visible focus of the CHARA Array by the end of 2021. It has been designed to perform a large survey of fundamental stellar parameters with, in the possible cases, a detailed imaging of the surface or environment of stars. To reach the required precision and sensitivity, CHARA/SPICA combines a low spectral resolution mode R = 140 in the visible and single-mode fibers fed by the AO stages of CHARA. This setup generates additional needs before the interferometric combination: the compensation of atmospheric refraction and longitudinal dispersion, and the fringe stabilization. In this paper, we present the main features of the 6-telescopes fibered visible beam combiner (SPICA-VIS) together with the first laboratory and on-sky results of the fringe tracker (SPICA-FT). We describe also the new fringe-tracker simulator developed in parallel to SPICA-FT.
The CHARA array is an optical/near infrared interferometer consisting of six 1-meter diameter telescopes, the longest baseline of which is 331 meters. With sub-millisecond angular resolution, the CHARA array is able to spatially resolve nearby stellar systems and reveal their detailed structures. To improve the sensitivity and scientific throughput, the CHARA array was funded by NSF-ATI in 2011 for an upgrade of adaptive optics (AO) systems to all six telescopes. This first grant covered Phase I of the adaptive optics system, which includes an on-telescope Wavefront Sensor (WFS) and non-common-path (NCP) error correction. Phase II of the program was funded by the NSF/MRI in 2016, and includes purchasing and installing the deformable mirrors at each telescope to complete the system. In this paper we will discuss both phases of the program, how the challenge of AO differs for interferometry, and the first results of the full system.
The CHARA Array is a six-element, optical/NIR interferometer, which currently has the largest operational baselines in the world. The Array is operated by Georgia State University and is located at the Mount Wilson Observatory in California. The Array thrives thanks to members of the CHARA consortium that includes LESIA (Observatoire de Paris), Observatoire de la Cote dAzur, University of Michigan, Sydney University, Australian National University, and University of Exeter. Here we give a brief introduction to the Array infrastructure with a focus on a developing Adaptive Optics (AO) program, the new community access program funded by the NSF, and recent science results.
The CHARA Array, operated by Georgia State University, is located at Mount Wilson Observatory just north of Los Angeles in California. The CHARA consortium includes many groups, including LIESA in Paris, Observatoire de la Cote d’Azur, the University of Michigan, Sydney University, the Australian National University, the NASA Exoplanet Science Institute, and most recently the University of Exeter. The CHARA Array is a six-element optical/NIR interferometer, and for the time being at least, has the largest operational baselines in the world. In this paper we will give a brief introduction to the array infrastructure with a focus on our Adaptive Optics program, and then discuss current funding as well as opportunities of funding in the near future.
We describe a back-end Adaptive Optics system for the CHARA Array called Lab-AO intended to compensate for non-common path errors between the AO system at the telescopes and the final beam combining area some hundreds of meters away. The system is an on-axis, very small field of view, low order system that will work on star light if enough is present, or will make use of a blue light beacon sent from the telescope towards the laboratory if not enough star light is available. The first of six of these system has been installed and has recently been tested on the sky. Another five will be built for the remaining telescopes later this year.
We initiated a multi-technique campaign to understand the physics and properties of the massive binary system MWC 314. Our observations included optical high-resolution spectroscopy and Johnson photometry, nearinfrared spectrophotometry, and K′−band long-baseline interferometry with the CHARA Array. Our results place strong constraints on the spectroscopic orbit, along with reasonable observations of the phase-locked photometric variability. Our interferometry, with input from the spectrophotometry, provides information on the geometry of the system that appears to consist of a primary star filling its Roche Lobe and loosing mass both onto a hidden companion and through the outer Lagrangian point, feeding a circumbinary disk. While the multi-faceted observing program is allowing us to place some constraints on the system, there is also a possibility that the outflow seen by CHARA is actually a jet and not a circumbinary disk.
The Fiber Linked Unit for Optical Recombination (FLUOR) is a precision interferometric beam combiner operating at the CHARA Array on Mt. Wilson, CA. It has recently been upgraded as part of a mission known as “Jouvence of FLUOR” or JouFLU. As part of this program JouFLU has new mechanic stages and optical payloads, new alignment systems, and new command/control software. Furthermore, new capabilities have been implemented such as a Fourier Transform Spectrograph (FTS) mode and spectral dispersion mode. These upgrades provide new capabilities to JouFLU as well as improving statistical precision and increasing observing efficiency. With these new systems, measurements of interferometric visibility to the level of 0.1% precision are expected on targets as faint as 6th magnitude in the K band. Here we detail the upgrades of JouFLU and report on its current status.
The CHARA array is an optical interferometer with six 1-meter diameter telescopes, providing baselines from 33 to 331 meters. With sub-milliarcsecond angular resolution, its versatile visible and near infrared combiners offer a unique angle of studying nearby stellar systems by spatially resolving their detailed structures. To improve the sensitivity and scientific throughput, the CHARA array was funded by NSF-ATI in 2011 to install adaptive optics (AO) systems on all six telescopes. The initial grant covers Phase I of the AO systems, which includes on-telescope Wavefront Sensors (WFS) and non-common-path (NCP) error correction. Meanwhile we are seeking funding for Phase II which will add large Deformable Mirrors on telescopes to close the full AO loop. The corrections of NCP error and static aberrations in the optical system beyond the WFS are described in the second paper of this series. This paper describes the design of the common-path optical system and the on-telescope WFS, and shows the on-sky commissioning results.
The CHARA Array is a six telescope optical/IR interferometer run by the Center for High Angular Resolution
Astronomy of Georgia State University and is located at Mount Wilson Observatory just to the north of Los Angeles
California. The CHARA Array has the largest operational baselines in the world and has been in regular use for
scientific observations since 2004. In 2011 we received funding from the NSF to begin work on Adaptive Optics for our
six telescopes. Phase I of this project, fully funded by the NSF grant, consists of designing and building wavefront
sensors for each telescope that will also serve as tip/tilt detectors. Having tip/tilt at the telescopes, instead of in the
laboratory, will add several magnitudes of sensitivity to this system. Phase I also includes a slow wavefront sensor in the
laboratory to measure non-common path errors and small deformable mirrors in the laboratory to remove static and
slowly changing aberrations. Phase II of the project will allow us to place high-speed deformable mirrors at the
telescopes thereby enabling full closed loop operation. We are currently seeking funding for Phase II. This paper will
describe the scientific rational and design of the system and give the current status of the project.
The CHARA Array is a six-telescope optical/IR interferometer managed by the Center for High Angular Resolution
Astronomy of Georgia State University and located at Mount Wilson Observatory in the San Gabriel Mountains
overlooking Pasadena, California. The CHARA Array has the longest operational baselines in the world and has been in
regular use for scientific observations since 2005. In this paper we give an update of instrumentation improvements,
primarily focused on the beam combiner activity. The CHARA Array supports seven beam combiners: CHARA
CLASSIC, a two-way high-sensitivity K/H/J band system; CLIMB, a three-way K/H/J open-air combiner; FLUOR, a
two-way K-band high-precision system; MIRC, a four/six-way H/K-band imaging system; CHAMP, a six-way K-band
fringe tracker; VEGA, a four-way visible light high spectral resolution system; and PAVO, a three-way visible light high
sensitivity system. We also present an overview of science results obtained over the last few years, including some recent imaging results.
KEYWORDS: Visibility, Interference (communication), Telescopes, Fringe analysis, Data analysis, Mirrors, Signal to noise ratio, Interferometry, Calibration, Camera shutters
The CHARA Array is a six telescope optical/IR interferometer run by the Center for High Angular Resolution
Astronomy of Georgia State University and is located at Mount Wilson Observatory just to the north of Los
Angeles California. The CHARA Array has the largest operational baselines in the world and has been in regular
use for scientific observations since 2004. Our most sensitive beam combiner capable of measuring closure phases
is the CLassic Interferometry with Multiple Baselines beam combiner known as CLIMB. In this paper we discuss
the design and layout of CLIMB with a particular focus on the data analysis methodology. This analysis is
presented in a very general form and will have applications in many other beam combiners. We also present
examples of on sky data showing the precision and stability of both amplitude and closure phase measurements.
FLUOR, which has been operational on CHARA since 2002, is an infrared fiber beam combiner. The telescope array will
soon be fitted with an adaptive optics system, which will enhance the interferometer performance. In this framework,
FLUOR has been entirely redeveloped and will be able to measure visibilities with higher accuracy and better sensitivity. The technical upgrades consist of improving some existing systems and developing new features. The bench, which is now remotely operable, primarily offers spectral dispersion (long fringes scanning), a more sensitive camera and a Fourier Transform Spectrometer mode. This paper presents the detailed opto-mechanical design of JouFLU (FLUOR rejuvenation), and the current instrument status.
In this paper, we review the current performance of the VEGA/CHARA visible spectrograph and make a review of
the most recent astrophysical results. The science programs take benefit of the exceptional angular resolution, the
unique spectral resolution and one of the main features of CHARA: Infrared and Visible parallel operation. We
also discuss recent developments concerning the tools for the preparation of observations and important features
of the data reduction software. A short discussion of the future developments will complete the presentation,
directed towards new detectors and possible new beam combination scheme for improved sensitivity and imaging
capabilities.
The efficiency of the CHARA Array has proven satisfactory for a wide variety of scientific programs enabled by the
first-generation beam combination and detector systems. With multi-beam combination and more ambitious scientific
goals, improvements in throughput and efficiency will be highly leveraged. Engineering data from several years of
nightly operations are used to infer atmospheric characteristics and raw instrumental visibility in both classic optical and
single-mode fiber beam combiners. This information is the basis for estimates of potential gains that could be afforded
by the implementation of adaptive optics. In addition to the very important partial compensation for higher order
atmosphere-induced wavefront errors, the benefits include reduction of static and quasi-static aberrations, reduction of
residual tilt error, compensation for differential atmospheric refraction, and reduction of diffractive beam propagation
losses, each leading to improved flux throughput and instrumental visibility, and to associated gains in operability and
scientific productivity.
We present the procedure used to optically align the CHARA telescopes. We show that the beam quality,
delivered by the CHARA telescopes E1, E2 and W2, is significantly better now than in 2008. RMS wavefront
error is about 200 nm. The astigmatism observed in W1 is more likely due to a combination of a mechanical
problem in the mounting and misalignment. We present wavefront quality results from four telescopes. Further
beam quality improvements can be expected when the second part of the alignment procedure (tuning) will be
carried out later this year.
This paper presents the current status of the VEGA (Visible spEctroGraph and polArimeter) instrument installed
at the coherent focus of the CHARA Array, Mount Wilson CA. Installed in september 2007, the first science
programs have started during summer 2008 and first science results are now published. Dedicated to high angular (0.3mas) and high spectral (R=30000) astrophysical studies, VEGA main objectives are the study of circumstellar environments of hot active stars or interactive binary systems and a large palette of new programs dedicated to fundamental stellar parameters. We will present successively the main characteristics of the instrument and its current performances in the CHARA environment, a short summary of two science programs and finally we will develop some studies showing the potential and difficulties of the 3 telescopes mode of VEGA/CHARA.
The CHARA Array is a six-telescope optical/IR interferometer operated by the Center for High Angular Resolution
Astronomy of Georgia State University and is located at Mount Wilson Observatory just to the north of Los Angeles
California. The CHARA Array has the largest operational baselines in the world and has been in regular use for scientific
observations since 2004. In this paper we give an update of instrumentation improvements, primarily focused on the
beam combiner activity. The CHARA Array supports seven beam combiners: CHARA CLASSIC, a two-way high
sensitivity K/H/J band system; CLIMB, a three-way K/H/J open air combiner, FLUOR, a two-way K band high
precision system; MIRC, a four/six-way H/K band imaging system; CHAMP, a six way K band fringe tracker; VEGA, a
four way visible light high spectral resolution system; and PAVO, a three-way visible light high sensitivity system. The
paper will conclude with a review of science results obtained over the last few years, including our most recent imaging results.
Two identical three-way beam combiners have been installed at the CHARA Array. The new setup is an extension of the
two-beam pupil plain combiner, which has been in use thus far. Using the new beam combiners we can now obtain
phase closure data in H, K or J band on two sets of three telescopes. A new optical design has been implemented to
image the six outputs of the combiners onto six separate pixels in the infrared detector array. The new optical
arrangement provides reduced background and spatial filtering. The magnitude limit of this beam combiner has reached
7.8 in K magnitude mainly as a result of better image quality by the new infrared camera optics.
The efficiency of the CHARA Array has proven satisfactory for the scientific programs enabled by the first-generation
beam combination and detector systems. With multi-beam combination and more ambitious scientific goals,
improvements in throughput and efficiency will be highly leveraged. Engineering data from several years of nightly
operations are used to infer atmospheric characteristics and raw instrumental visibility in both classic optical and single-
mode fiber beam combiners. This information is the basis for estimates of potential gains that could be afforded by the
implementation of adaptive optics. This includes reduction of static and quasi-static aberrations, reduction of residual
tilt error, compensation for differential atmospheric refraction, reduction of diffractive beam propagation losses, each
leading to improved flux throughput and instrumental visibility, and to associated gains in operability and scientific
productivity.
The VEGA spectrograph and polarimeter has been recently integrated on the visible beams of the CHARA
Array. With a spectral resolution up to 35000 and thanks to operation at visible wavelengths, VEGA brings
unique capabilities in terms of spatial and spectral resolution to the CHARA Array. We will present the main
characteristics of VEGA on CHARA, some results concerning the performance and a preliminary analysis of the
first science run.
The Precision Astronomical Visible Observations (PAVO) beam combiner is a new concept in visible beam
combination, recently commissioned at the CHARA array. By creating spatially-modulated fringes in a pupil
plane and then dispersing with an integral field unit, PAVO utilizes the full multi-r0 aperture of the CHARA
array over a standard 50% (630-950nm) bandwidth. In addition, minimal optimized spatial filtering ensures
calibration that is in principle as good as using single-mode fibers. We describe the design of and initial results
from the PAVO instrument.
The CHARA Array is a six telescope optical/IR interferometer run by the Center for High Angular Resolution
Astronomy of Georgia State University (GSU) and is located at Mount Wilson Observatory just to the north of Los
Angeles, California. The CHARA Array has the largest operational baselines in the world and has been in regular use for
scientific observations since 2004. In this paper we give an update of instrumentation improvements, primarily focused
on the beam combiner activity. The CHARA Array supports seven beam combiners: CHARA CLASSIC, a two way
high sensitivity K/H band system; CLIMB, an upgrade to CLASSIC that includes closure phase measurements; FLUOR,
a two way K band high precision system; MIRC, a six way H/K band imaging system; CHAMP, a six way K band fringe
tracker; VEGA, a 4 way visible light high spectral resolution system; and PAVO, a 3 way visible light high sensitivity
system. The paper will conclude with a brief review of some science results obtained over the last few years.
We report the first scientific results from the Michigan Infrared Combiner (MIRC), including the first resolved
image of a main-sequence star besides the Sun. Using the CHARA Array, MIRC was able to clearly resolve the
well-known elongation of Altair's photosphere due to centrifugal distortion, and was also able to unambiguously
image the effect of gravity darkening. In this report, we also show preliminary images of the interacting binary
β Lyr and give an update of MIRC performance.
A new CCD based tip/tilt detection system was installed in the CHARA array on August 21, 2005. The new system can serve six telescopes simultaneously and is sensitive to a wavelength as long as 1 μm. The tip/tilt camera is based on an E2V CCD39-01, a small (80×80) back illuminated frame transfer device with a pixel size of 24×24 μm2. The measured read-out noise and conversion gain of the camera is 6.4 e- at 384 kpx s-1 and 1.1 e-/ADU, respectively at a temperature of -30 C°. Nine quad-pixel channels have been created on the CCD in a 10×10 pixel sub-array close to one of the read out amplifiers. Vignetting on the quad-pixel channels is negligible. Crosstalk between adjacent channels has been eliminated. The image scale on the CCD is 3.46 arcsecs/pixel. The limiting magnitude is expected to be V=12 at 20 ms integration time under good seeing conditions.
Extrasolar planetary systems are assumed as a sample to exhibit random orbital inclinations. The chance exists that a few of the 152 extrasolar planetary systems known to date may have face-on orbits for which the sin i factor will make a stellar-mass companion mimic a planetary-mass object. Such systems may thus harbor a late spectral type stellar companion instead of planets. Using Georgia State University's CHARA Array, we are undertaking an observing program on accessible extrasolar planetary systems that is expected to be completed in 2007. This effort will assist in culling the exoplanet list of some very low-inclination stellar interlopers that may be present. We will also determine the diameters of the central stars in an effort to refine our knowledge of the evolutionary status of the host stars.
We describe a project for the installation of a visible focal instrument at the CHARA Array, named VEGA for Visible spEctroGraph and polArimeter. This new instrument will further open the visible domain and offer both spectral and polarimetric capabilities at the CHARA Array. It will create a new and unique scientific niche for the CHARA Array, especially in the context of international competition. The combination of the visible domain and high spectral resolution mode combined with a good sensitivity will allow VEGA/CHARA to carve out a new piece of observational phase space and compliment many existing or planned near-infrared interferometers. VEGA will help make CHARA the interferometer with the largest spectral and spatial resolution worldwide.
The Michigan Infrared Combiner (MIRC) has been designed for two primary goals: 1) imaging with all six CHARA telescopes simultaneously in the near-infrared, 2) direct detection of "hot Jupiter" exoplanets using precision closure phases. In September 2005, MIRC was commissioned on-sky at the CHARA Array on Mt. Wilson, CA, successfully combining light from 4 telescopes simultaneously. After a brief overview of MIRC features and design philosophy, we provide detailed description of key components and present results of laboratory tests. Lastly, we present first results from the commissioning run, focusing on engineering performance. We also present remarkable on-sky closure phase results from the first night of recorded data with the best-ever demonstrated closure phase stability and precision (ΔΦ = 0.03 degrees).
Georgia State University's Center for High Angular Resolution Astronomy (CHARA) operates a multi-telescope, long-baseline, optical/infrared interferometric array on Mt. Wilson, California. We present a brief update on the status of this facility along with summaries of the first scientific results from the Array.
Georgia State University's Center for High Angular Resolution Astronomy (CHARA) operates a multi-telescope, long-baseline, optical/infrared interferometric array on Mt. Wilson, California. We present an update on the status of this facility along with a sample of preliminary results from current scientific programs.
In this paper we describe the telescope optics, manufacturing tolerances and the geometric alignment procedure of the CHARA telescopes. We also report on our efforts to test and refine the alignment of the telescopes by implementing the curvature sensing method. The results of the first experiments on telescope W1 show that we can get consistent results with this method. We also found a slight distortion caused by the lateral support of the primary mirror.
The CHARA Array is a six element optical and near infrared interferometer built by Georgia State University on Mount Wilson in California. It is currently operating in the K and H bands and has the largest baseline (330 m) in operation of any similar instrument in the world. We expect to begin I band operations in 2002. We will present an update of the status of the instrumentation in the Array and set out our plans for the near term expansion of the system.
Individually resolved packets produced by scans from the CHARA Interferometer Array for binary stars can be analyzed in terms of the astrometry of the binary without using visibilities. We considered various methods for finding the locations of the packets, including autocorrelation and Shift-and-Add, but our best results were obtained from a method of direct packet fitting.
This method was put to use in analyzing two data sets each for the stars 12 Persei and Beta Arietis respectively. These data were taken between Nov 6 and 15, 2001 with the CHARA Array 330 m E1-S1 baseline. Some 460 to 830 scans were taken in both directions with the auxiliary PZT, and seeing conditions were fair to poor for these runs (r0 ≈ 7 cm).
This procedure yielded a projected separation for each data set, with an intrinsic accuracy of 0.15 - 0.3 mas. This represents an order of magnitude improvement over speckle interferometry techniques. The orbits were refined by a maximum likelihood technique. In the case of 12 Per the semimajor axis obtained was α = 53.53 mas, compared with the previous orbit of 53.38 mas, a small increase of 0.27%, which implies a mass increase of 0.8%, an insignificant change for this well-established orbit. For Beta Arietis, we find that α = 35.62 versus the previous orbit's value of 36.00 mas. This is a 1.0% decrease, resulting in a mass decrease of 3.0% for this system.
The CHARA Array consists of six 1-meter telescopes. The telescopes are at fixed positions laid out in a Y-shaped pattern, where the longest available baseline is 330 meters. The resolving power of this interferometric array operating at visible and short infrared wavelengths is better than one milli-arcsecond. The current infrared beam combination system is capable of combining the light from any two of the six telescopes in the array. With the existing infrared beam combination and detection system, we routinely observe in K and H band, where our magnitude limit is 6.
Georgia State University's Center for High Angular Resolution Astronomy (CHARA) operates a multi-telescope, long-baseline, optical/infrared interferometric array on Mt. Wilson, California. Since its inception, one of the primary scientific goals for the CHARA Array has been the resolution of spectroscopic binary stars, which offer tremendous potential for the determination of fundamental parameters for stars (masses, luminosities, radii and effective temperatures). A new bibliographic catalog of spectroscopic binary orbits, including a calculated estimate of the anticipated angular separation of the components, has been produced as an input catalog in planning observations with the Array. We briefly describe that catalog, which will be made available to the community on the Internet, prior to discussing observations obtained with our 330-m baseline during the fall of 2001 of the double-lined spectroscopic systems β Aur and β Tri. We also describe the initial results of an inspection of the extrasolar planetary system υ And.
During the 2001 observing season, the CHARA Array was in regular operation for a combined program of science, technical development, test, and commissioning. Interferometric science operations were carried out on baselines up to 330 meters -- the maximum available in the six-telescope array. This poster gives sample results obtained with the approximately north-south telescope pair designated S1-E1. At operating wavelengths in the K band, the 330 m baseline is well suited to diameter determinations for angular diameters in the range 0.6 - 1.2 milliarcseconds. This is a good
range for study of a wide range of hot stars. In this poster, angular
diameters for a set of A,B and F stars are compared to results derived from other sources. These confirm CHARA performance in the range 3-10% in visibility. The normal stars follow a normal spectral type - surface brightness relation, and a classical Be star deviates from the norm by an amount consistent with its apparent colors.
The CHARA array achieved first fringes late last year and is currently being expanded on Mount Wilson CA. This presentation is a follow on from the overview given by Hal McAlister and will give more technical detail on the optical systems, with a focus on the telescopes, the delay lines, the control system, and the beam combining scheme. Combining more than three beams is not a simple problem with no obvious best solution, and we have by no means locked ourselves into a particular design. Preliminary designs will be shown, the first beam combiner will also be discussed along with our plans for future development.
Georgia State University's Center for High Angular Resolution Astronomy (CHARA) is building an interferometric array of telescopes for high resolution imaging at optical and infrared wavelengths. The `CHARA Array' consists of six 1-m diameter telescopes arranged in a Y-shaped configuration with a maximum baseline of approximately 350 m. Construction of the facility will be completed during 2000, and the project will enter a phase in which beam combination subsystems will be brought on line concurrently with initial scientific investigations. This paper provides an update on recent progress, including our reaching the significant milestone of `first fringes' in November 1999. An extensive collection of project technical reports and images are available at our website.
The CHARA Array employs vacuum light pipes between the telescopes and the beam combination area. The complex terrain of the Mt. Wilson site poses interesting problems, with light pipes both underground and suspended up to 10 meters above ground. Telescope to beam-combination distances are up to about 180 meters. The support scheme and alignment strategy will be described.
The Center for High Angular Resolution Astronomy (CHARA) at Georgia State University is building an
interferometric array of telescopes for high resolution imaging at optical and infrared wavelengths. The "CHARA Array" will initially consist offive 1-rn diameter telescopes arranged in a Y-shaped configuration with a maximum baseline of approximately 350 m. The facility is being constructed on Mt. Wilson, near Pasadena, California, a site noted for stable atmospheric conditions that often gives rise to exceptional image quality. The Array will be capable of submilliarcsecond imaging and will be devoted to a broad program of science aimed at fundamental stellar astrophysics in the visible and the astrophysics of young stellar objects in the infrared (2.2μm) spectral regions. This project is being funded in approximately 50/50% shares by Georgia State University and the National Science Foundation. The CHARA Array is expected to become operational during 1999. This paper presents a project status report. An extensive collection of project reports and images are available at our website (http://www.chara.gsu.edu).
The telescope requirements of optical interferometry are somewhat different from conventional astronomy. The need for multiple units (in the CHARA case initially five, eventually seven) accentuates the importance of cost control, and at the same time provides opportunity for cost savings by careful procurement and production practices. Modern ideas about telescope enclosures offer significantly reduced dome seeing, but it is difficult to capture these benefits at low cost. The CHARA group has followed a series of design and bid procedures intended to optimize the costperformance of the telescope+enclosures. These have led to a compact but massive telescope design, blending modern and classical features, an unusual mirror blank selection process (directly ompeting several mirror blank technologies) , and a novel telescope enclosure concept which allows a continuous trade between wind protection and natural ventilation. This contribution will review and motivate the design decisions and show the resulting equipment and facilities.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.