The national major scientific research instrument project: “The accurate infrared solar magnetic field measurements system” (AIMS) is under construction. The figure of the primary of the AIMS can be measured using a computer generated hologram (CGH) test during the polishing process, however, a distortion correction procedure is needed to mapping the coordinates of the mirror and the pixels of fringes due to the large distortion exists in the CGH test configuration, and the mapping relationship need to be re-calibrated after the primary mirror was reassembled, which makes the test process cumbersome. In this paper, a sub-aperture stitching equipment was established, which uses a two\dimensional guide that can move a 450mm reference flat mirror to any position that can cover the aperture of the primary mirror. The surface shape requirement of the 450 mm flat mirror was given by Monte-Carlo analysis and further the figure was tested by using Ritchey-Common technique. Furthermore, a sub-aperture stitching test system was established and a modified simultaneous fitting algorithm was proposed to stitch the sub-aperture wavefront together, the correctness of the technique was verified by a full aperture figure test experiment. Finally, we applied the developed approach to the site test of figure of the AIMS primary mirror.
AIMS is an infrareds optical system for the accurate measurement of solar magnetic field, which is a national major scientific research project currently developed. The guiding optical system of AIMS is an off-axis Gregorian system, due to the designed minimum angle between the optical axis of the optical system and horizontal plane is 14.036°, a sub-aperture stitching test approach is developed to test the wavefront of the system. That makes the process of precision alignment of the system very difficult and laborious. Therefore, we developed a two-step alignment approach that based on merit function regression method, the developed method can make alignment of AIMS guiding optical system efficiency and accuracy. In this paper, we explain the detailed two-step alignment method and apply it to the real alignment of AIMS guiding system. Aided with sub-aperture stitching measurements, the AIMS guiding system is aligned and the results show that in 0.076λrms wavefront error in effective aperture was achieved.
Sub-aperture stitching interferometry can be used for measurement of wavefront of large aperture optical system. A variety of sub-aperture stitching algorithms have been studied to reconstruct the sub-aperture data to obtain full aperture wavefront. The simultaneous fitting method plays an important role among those stitching algorithms which uses a series of global polynomials to accomplish the fitting of the test wavefronts, however, it can only be applied in the case of there have no overlap between each sub-apertures. Therefore, a modified simultaneous fitting method is proposed and is applied to measure the wavefront of large aperture optical system. The proposed algorithm is applicable whether there exists overlap between each sub-aperture or not. The numerical simulation is carried out to evaluate the accuracy of the algorithm. Further, a practical stitching experiment that test an optical system with a diameter of 850mm was implemented to demonstrate the modified algorithm.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.