A structure for backside illuminated ultrahigh-speed charge coupled devices (CCDs) designed to improve the light
sensitivity was investigated. The structure's shooting speed of 1 million frames/second was made possible by directly
connecting CCD memories, which record video images, to the photodiodes of individual pixels. The simultaneous
parallel recording operation of all pixels results in the highest possible frame rate. Because back-side illumination
enables a fill factor of 100% and a quantum efficiency of 60%, sensitivity ten or more times that of front-side
illumination can be achieved. Applying backside illumination to ultrahigh-speed CCDs can thus solve the problem of a
lack of incident light. An n- epitaxial layer/p- epitaxial layer/p+ substrate structure was created to collect electrons
generated at the back side traveling to the collection gate. When a photon reaches the deep position near the CCD
memory in the p-well, an electron generated by photoelectric conversion directly mixes into the CCD memory. This
mixing creates noise, making it necessary to reduce the reach of the incident light. Setting the thickness of a double
epitaxial layer to 30 μm, however, will inhibit the generation of this noise. A potential profile for the n-/p-/p+ structure
was calculated using a three-dimensional semiconductor device simulator. The transit time from electron generation to
arrival at the collection gate was also calculated. The concentrations of the n- and p- epitaxial layers were optimized to
minimize transit time, which was ultimately 1.5 ns. This value is adaptive to a frame rate of 100 million frames/second.
Charge transfer simulation of a part of the pixel was conducted to confirm the smooth transfer of electrons without their
staying too long in one place.
This paper outlines a special microscope under development, named "Ultra-high-speed bionanoscope" for ultra-highspeed
imaging in biological applications, and preliminary design of the image sensor, which is the key component in the
system. The ultra-high-speed bionanoscope consists of two major subsystems: a video camera operating at more than 10
Mfps with ultra-high-sensitivity and the special microscope to minimize loss of light for seriously reduced illumination
light energy due to the ultra-high-speed imaging. The ultra-high-frame rate is achieved by introducing a special structure
of a CCD imager, the ISIS, In-situ Storage Image Sensor, invented by Etoh and Mutoh. The ISIS has an array of pixels
each of which equips with a slanted linear CCD storage area for more than 100 image signals for reproduction of
smoothly moving images. The ultra-high-sensitivity of the sensor of less than 10 photons is achieved by introducing
three existing technologies, backside-illumination, cooling, and the CCM, Charge Carrier Multiplication invented by
Hynecek.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.