Paper
20 May 2004 EUV absorbance and dry-etching characteristics of TaGeN films for EUVL mask absorber
Author Affiliations +
Abstract
EUV absorbance and dry-etching characteristics of TaGeN film for use as the absorber material in EUVL masks were evaluated. Measurement of the EUV reflectivity of TaGeN on a Mo/Si multilayer revealed the linear absorption coefficient of TaGeN film to be about 35 μm-1 at the wavelength of 13.5 nm. Reflectivity profiles obtained by simulations using this value fit measured profiles for several absorber thicknesses very well. Since the reflectivity of TaGeN on a multilayer is affected by the interference between the EUV light reflected from the absorber surface and that reflected from the multilayer underneath, the mask contrast varies periodically with absorber thickness. To obtain a mask contrast of 100, the TaGeN has to be 66 nm thick, if interference is not taken into account, and 80 nm thick, if it is. TaGeN film was ethced with an ECR plasma etcher using CI2 gas. The etching selectivity was found to be about 1.0 for TaGeN/resist and about 20 for TaGeN/Cr. 275-nm L/S patterns with vertical sidewalls were successfully fabricated in TaGeN. There were no serious problems with the CD control or LER of etched TaGeN patterns.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuusuke Tanaka, Dongwan Kim, Hiromasa Yamanashi, and Iwao Nishiyama "EUV absorbance and dry-etching characteristics of TaGeN films for EUVL mask absorber", Proc. SPIE 5374, Emerging Lithographic Technologies VIII, (20 May 2004); https://doi.org/10.1117/12.536042
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Extreme ultraviolet

Reflectivity

Multilayers

Etching

Extreme ultraviolet lithography

Absorbance

RELATED CONTENT

Cr absorber mask for extreme-ultraviolet lithography
Proceedings of SPIE (January 22 2001)
Integration of antireflection coatings on EUV absorber stacks
Proceedings of SPIE (December 27 2002)
EUV mask fabrication with Cr absorber
Proceedings of SPIE (July 21 2000)
Inspection and repair of EUV
Proceedings of SPIE (March 11 2002)
Mask topography simulation for EUV lithography
Proceedings of SPIE (June 25 1999)

Back to Top