Paper
25 September 2008 Measurement of thermal expansion coefficient and biaxial modulus of DWDM filters using phase-shift Interferometer
Author Affiliations +
Abstract
Dense-wavelength-division-multiplexing (DWDM) filter is a very sensitive component in wavelength shift. The temperature shift of central wavelength (TSCW) of filter is depended on the mechanical properties of the stress. In this paper, a modified Stoney's equation was applied to analyze the thermal stress of DWDM filters for the reason of the thickness ratio (thin film thickness/substrate thickness) larger than 1%. The phase-shift interferometer and TSCW were applied to measure and achieve the coefficient of thermal expansion (CTE), biaxial modulus, temperature optical coefficient, stress optical coefficient, and Poisson ratio of DWDM filter. Based on this method, we can obtain the CTE of DWDM filter 0.87pm/ °C ,the biaxial modulus 41 GPa, Poisson ratio 0.22, temperature optical coefficient 1.4×10-5 / °C, and stress optical coefficients -1.9×10-12 /Pa. To achieve zero TSCW for a DWDM filter, the CTE of the substrate should be 10.36ppm/ °C.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chien-Cheng Kuo, Sheng-Hui Chen, and Cheng-Chung Lee "Measurement of thermal expansion coefficient and biaxial modulus of DWDM filters using phase-shift Interferometer", Proc. SPIE 7101, Advances in Optical Thin Films III, 71010T (25 September 2008); https://doi.org/10.1117/12.798743
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dense wavelength division multiplexing

Temperature metrology

Optical filters

Thin films

Refractive index

Interferometers

Phase interferometry

RELATED CONTENT


Back to Top