This will count as one of your downloads.
You will have access to both the presentation and article (if available).
Purpose: Physics-informed neural networks (PINNs) and computational fluid dynamics (CFD) have both demonstrated an ability to derive accurate hemodynamics if boundary conditions (BCs) are known. Unfortunately, patient-specific BCs are often unknown, and assumptions based upon previous investigations are used instead. High speed angiography (HSA) may allow extraction of these BCs due to the high temporal fidelity of the modality. We propose to investigate whether PINNs using convection and Navier-Stokes equations with BCs derived from HSA data may allow for extraction of accurate hemodynamics in the vasculature.
Materials and Methods: Imaging data generated from in vitro 1000 fps HSA, as well as simulated 1000 fps angiograms generated using CFD were utilized for this study. Calculations were performed on a 3D lattice comprised of 2D projections temporally stacked over the angiographic sequence. A PINN based on an objective function comprised of the Navier-Stokes equation, the convection equation, and angiography-based BCs was used for estimation of velocity, pressure and contrast flow at every point in the lattice.
Results: Imaging-based PINNs show an ability to capture such hemodynamic phenomena as vortices in aneurysms and regions of rapid transience, such as outlet vessel blood flow within a carotid artery bifurcation phantom. These networks work best with small solution spaces and high temporal resolution of the input angiographic data, meaning HSA image sequences represent an ideal medium for such solution spaces.
Conclusions: The study shows the feasibility of obtaining patient-specific velocity and pressure fields using an assumption-free data driven approach based purely on governing physical equations and imaging data.
The 3D model was connected to a pulsatile flow loop for simulating interventions using clinical devices such as catheters and stents. To validate the x-ray attenuation and establish clinical accuracy, the automatic exposure selection by a clinical c-arm system for the phantom was compared with that for a commercial anthropomorphic head phantom (SK-150, Phantom Labs). The percentage difference between automatic exposure selection for the neuro-intervention phantom and the SK-150 phantom was under 10%.
By changing 3D printed models, various patient diseased anatomies can be simulated accurately with the necessary x-ray attenuation. Using this platform various interventional procedures were performed using new imaging technologies such as a high-resolution x-ray fluoroscope and a dose-reduced region-of-interest attenuator and differential temporally filtered display for enhanced interventional imaging. Simulated clinical views from such phantom-based procedures were used to evaluate the potential clinical performance of such new technologies.
To simulate the human neurovasculature in the Circle of Willis, patient-based phantoms with aneurysms were 3D printed using a Objet Eden 260V printer. Anthropomorphic head phantoms and a human skull combined with acrylic plates simulated human head bone anatomy and x-ray attenuation. For dynamic studies the 3D printed phantom was connected to a pulsatile flow loop with the anthropomorphic phantom underneath. By combining different 3D printed phantoms and the anthropomorphic phantoms, different patient pathologies can be simulated. For static studies a 3D printed neurovascular phantom was embedded inside a human skull and used as a positional reference for treatment devices such as stents. To simulate tissue attenuation acrylic layers were added. Different combinations can simulate different patient treatment procedures.
The Complementary-Metal-Oxide-Semiconductor (CMOS) based High Resolution Fluoroscope (HRF) with 75μm pixels offers an advantage over the state-of-the-art 200 μm pixel Flat Panel Detector (FPD) due to higher Nyquist frequency and better DQE performance. Whether this advantage is clinically useful during an actual clinical neurovascular intervention can be addressed by qualitatively evaluating images from a cohort of various cases performed using both detectors. The above-mentioned method can offer a realistic substitute for an actual clinical procedure. Also a large cohort of cases can be generated and used for a HRF clinical utility determination study.
First a model to simulate the aortic arch and its movement was built. A coronary stent was used to simulate a bioprosthetic valve used in TAVR procedures and was deployed under dose-reduced ROI fluoroscopy during the simulated heart motion. The images were then retrospectively processed for noise reduction in the periphery, using recursive temporal filtering, spatial filtering and a combination of both.
Quantitative metrics for all three noise reduction schemes are calculated and are presented as results. From these it can be concluded that with significant anatomical motion, a combination of spatial and recursive temporal filtering scheme is best suited for reducing the excess quantum noise in the periphery. This new noise-reduction technique in combination with ROI fluoroscopy has the potential for substantial patient-dose savings in cardiac interventions.
View contact details
No SPIE Account? Create one
