This will count as one of your downloads.
You will have access to both the presentation and article (if available).
ARIEL is based on a 1 m class telescope feeding two instruments: a moderate resolution spectrometer covering the wavelengths from 1.95 to 7.8 microns; and a three-channel photometer (which also acts as a fine guidance sensor) with bands between 0.5 and 1.2 microns combined with a low resolution spectrometer covering 1.25 to 1.9 microns. During its 3.5 years of operation from an L2 orbit, ARIEL will continuously observe exoplanets transiting their host star.
This paper presents an overall view of the integrated design of the payload proposed for this mission. The design tightly integrates the various payload elements in order to allow the exacting photometric stability targets to be met, while providing simultaneous spectral and photometric data from the visible to the mid-infrared. We identify and discuss the key requirements and technical challenges for the payload and describe the trade-offs that were assessed during phase A, culminating in the baseline design for phase B1. We show how the design will be taken forward to produce a fully integrated and calibrated payload for ARIEL that can be built within the mission and programmatic constraints and will meet the challenging scientific performance required for transit spectroscopy.
The payload is based on a 1-m class telescope ahead of a suite of instruments: two spectrometric channels covering the band 1.95 to 7.80 μm and four photometric channels working in the range 0.5 to 1.9 μm.
The production of the primary mirror (M1) is one of the main technical challenges of the mission. A trade-off on the material to be used for manufacturing the 1-m diameter M1 was carried out, and aluminium alloys have been selected as the baseline materials both for the telescope mirrors and structure. Aluminium alloys have demonstrated excellent performances both for IR small size mirrors and structural components, but the manufacturing and thermo-mechanical stability of large metallic optics still have to be demonstrated especially at cryogenic temperatures.
The ARIEL telescope will be realized on-ground (1 g and room temperature), but it shall operate in space at about 50 K. For this reason a detailed tolerance analysis was performed to assess the telescope expected performance.
M1 is an off-axis section of a paraboloidal mirror and will be machined from a single blank as a stand-alone part. To prove the feasibility of such a large aluminium mirror, a pathfinder mirror program has been started. The prototype has been realized and tested, so far at room temperature, by Media Lario S.r.l.. Cryogenic testing of the prototype will be performed during Phase B1.
ARIEL is based on a 1-m class telescope feeding a collimated beam into two separate instrument modules: a spectrometer module covering the waveband between 1.95 μm and 7.80 μm; and a combined fine guidance system/visible photometer/NIR spectrometer. The primary payload is the spectrometer, whose scientific observations are supported by the fine guidance system and photometer, which is monitoring the photometric stability of the target and allowing, at the same time, the target to be properly pointed.
The telescope configuration is a classic Cassegrain layout used with an eccentric pupil and coupled to a tertiary off-axis paraboloidal mirror; the design has been conceived to satisfy all the mission requirements, and it guarantees the requested “as-built” diffraction limited performance.
To constrain the thermo-mechanically induced optical aberrations, the primary mirror (M1) temperature will be monitored and finely tuned using an active thermal control system based on thermistors and heaters. They will be switched on and off to maintain the M1 temperature within ±1 K by the Telescope Control Unit (TCU).
The TCU is a payload electronics subsystem also responsible for the thermal control of the main spectrometer detectors as well as the secondary mirror (M2) mechanism and IR calibration source management. The TCU, being a slave subsystem of the Instrument Control Unit (ICU), will collect the housekeeping data from the monitored subsystems and will forward them to the master unit. The latter will run the application software, devoted to the main spectrometer management and to the scientific data on-board processing.
Presently, the main research activity at OPC concerns the observation and follow-up of transiting exoplanets while the team is involved in national and international collaborations, like TESS SG1 follow-up for the observation of exoplanet candidates and GAPS, which exploits several telescopes and facilities in Italy (Asiago, OAVdA) and Canary Islands (HARPS-North and GIANO instruments as well as their improved combined version) for exoplanetary characterization.
OPC researchers perform their activity in the framework of collaborations with Osservatorio Astrofisico di Torino and Osservatorio Autonomo della Val d'Aosta. From July 2017, to date, commissioning observing runs have been done in order to test the telescope and mount capabilities, systematics and limits and to eventually improve the accuracy of the overall system. A software algorithm has been developed1 in order to estimate the accuracy of any transit observation, so that parameters like the integration time and telescope focus can be chosen to obtain a higher signal to noise ratio, and also to understand the observational limits of the instruments. Currently, the system is able to work within±1 mmag of accuracy and differential photometry error (refer to the error bars in Figure 6) so that exoplanet transits with (see abstract for symbol _5 mmag) of relative depth can be observed fruitfully.
The OPC Research Team also aims at the observation of the optical/visible counterpart of gamma ray bursts afterglows, supernovae and GW ToO (Gravitational Waves events / Targets of Opportunity) follow-up along with transiting exoplanets follow-up. The reason is twofold. First of all, the scientific interest on these events of the researchers supporting OPC, and then the demand of the astronomical community for follow-up observations with small telescopes, around the 1-m class, since larger telescopes are often used for primary targets observations. To pursue the target of observing GRBs and the optical counterpart of GW events, it is planned to improve the main instrument accuracy and to develop a consolidated observation procedure, to be ready for the next LIGO-VIRGO O3 run scheduled for the Autumn, 2018.
ARIEL has been selected by the European Space Agency (ESA) as the next medium-class science mission (M4) to be launched in 2028. The aim of the ARIEL mission is to study the atmospheres of a selected sample of exoplanets.
The payload is based on a 1-m class telescope ahead of a suite of instruments: two spectrometric channels covering the band 1.95 to 7.80 μm without gaps, three photometric channels working in the range 0.5 to 1.2 μm, and a low-resolution spectrometer in the range 1.25 to 1.95 μm.
The telescope layout is conceived as an eccentric pupil two-mirror classic Cassegrain configuration coupled to a tertiary off-axis paraboloidal mirror. The telescope will be realized on-ground, i.e. subjected to gravity and at room temperature, but it shall operate in space, at 0 g, and at a temperature of about 50 K. For this reason, the telescope expected “as-built” in-flight performance has to be determined via a detailed thermo-elastic analysis.
A trade-off on the material to be used for manufacturing the 1-m diameter primary mirror (M1) was carried out, and aluminum alloys have been selected as the baseline materials for both the telescope mirrors and structure.
The use of metals, like aluminum alloys, is nowadays frequently considered for the fabrication of space telescopes observing in the infrared wavelength range. Small-size aluminum parts have been proved to be popular both for IR mirrors and structural components, but the manufacturing and stability of large metallic optics still have to be demonstrated. The production of a large aluminum mirror such as that of ARIEL is a challenge, and to prove its feasibility a dedicated study and development program has been started. A prototype, with the same size of the M1 flight model but a simpler surface profile, has been realized and tested.
During its four-years mission, ARIEL will observe several hundreds of exoplanets ranging from Jupiter- and Neptune-size down to super-Earth and Earth-size with its 1 meter-class telescope.3 The analysis of spectra and photometric data will allow to extract the chemical fingerprints of gases and condensates in the planets atmospheres, including the elemental composition for the most favorable targets. It will also enable the study of thermal and scattering properties of the atmosphere as the planet orbits around its parent star.
The high sensitivity requirements of the mission need an extremely stable thermo-mechanical platform. In this paper we describe the thermal architecture of the payload and discuss the main requirements that drive the design. The ARIEL thermal configuration is based on a passive and active cooling approach. Passive cooling is achieved by a V-Groove based design that exploits the L2 orbit favorable thermal conditions. The telescope and the optical bench are passively cooled to a temperature close to 50K to achieve the required sensitivity and stability. The photometric detectors are maintained at the operating temperature of 50K by a dedicated radiator coupled to cold space. The IR spectroscopic channel detectors require a lower temperature reference. This colder stage is provided by an active cooling system based on a Neon Joule-Thomson cold end, fed by a mechanical compressor, able to reach temperatures lower than 30K.
Thermal stability of the telescope and detector units is one of the main drivers of the design. The periodical perturbations due to orbital changes, to the active cooling or to other internal instabilities make the temperature control one of the most critical issues of the whole architecture. The thermal control system design, based on a combination of passive and active solutions aimed at maintaining the required stability at the telescope and detector stages level, is described.
We report here about the baseline thermal architecture at the end of the Phase A, together with the main trade-offs needed to enable the ARIEL exciting science in a technically feasible payload design. Thermal modeling results and preliminary performance predictions in terms of steady state and transient behavior are also discussed.
Finally, this paper proposes another class of adapters to be optically coupled on each pixel of MAPMT detector selected, consisting of non-imaging concentrators as Winston cones.
ARIEL is based on a 1-m class telescope ahead of two spectrometer channels covering the band 1.95 to 7.8 microns. In addition there are four photometric channels: two wide band, also used as fine guidance sensors, and two narrow band. During its 3.5 years of operations from L2 orbit, ARIEL will continuously observe exoplanets transiting their host star.
The ARIEL optical design is conceived as a fore-module common afocal telescope that will feed the spectrometer and photometric channels. The telescope optical design is composed of an off-axis portion of a two-mirror classic Cassegrain coupled to a tertiary off-axis paraboloidal mirror. The telescope and optical bench operating temperatures, as well as those of some subsystems, will be monitored and fine tuned/stabilised mainly by means of a thermal control subsystem (TCU-Telescope Control Unit) working in closed-loop feedback and hosted by the main Payload electronics unit, the Instrument Control Unit (ICU). Another important function of the TCU will be to monitor the telescope and optical bench thermistors when the Payload decontamination heaters will be switched on (when operating the instrument in Decontamination Mode) during the Commissioning Phase and cyclically, if required. Then the thermistors data will be sent by the ICU to the On Board Computer by means of a proper formatted telemetry. The latter (OBC) will be in charge of switching on and off the decontamination heaters on the basis of the thermistors readout values.
In this work preliminary results achieved with a novel 2D and 3D XRF facility, called Rainbow X-Ray (RXR), are reported, with particular attention to the spatial resolution achieved. RXR is based on the confocal arrangement of three polycapillary lenses, one focusing the primary beam and the other two capturing the fluorescence signal. The detection system is split in two couples of lens-detector in order to cover a wider energy range. The entire device is a laboratory user-friendly facility and, though it allows measurements on medium-size objects, its dimensions do not preclude it to be transported for in situ analysis on request, thanks also to a properly shielded cabinet.
Diamond is a promising material for the production of semitransparent in situ X-ray BPMs withstanding the high dose rates of SR rings and high energy FELs. We report on the development of freestanding, single crystal CVD diamond detectors. Performances in both low and radio frequency SR beam monitoring are presented. For the former, sensitivity deviation was found to be approximately 2%; a 0.05% relative precision in the intensity measurements and a 0.1-μm precision in the position encoding have been estimated. For the latter, single-shot characterizations revealed sub-nanosecond rise-times and spatial precisions below 6 μm, which allowed bunch-by-bunch monitoring in multi-bunch operation.
Preliminary measurements at the Fermi FEL have been performed with this detector, extracting quantitative intensity and position information for FEL pulses (~ 100 fs, energy 12 ÷ 60 eV), with a long-term spatial precision of about 85 μm; results on FEL radiation damages are also reported. Due to their direct, low-energy band gap, InGaAs quantum well devices too may be used as fast detectors for photons ranging from visible to X-ray. Results are reported which show the capability of a novel InGaAs/InAlAs device to detect intensity and position of 100-fs-wide laser pulses.
View contact details
No SPIE Account? Create one
