The MMT Adaptive optics exoPlanet characterization System (MAPS) is currently in its engineering phase, operating on sky at the MMT Telescope. The MAPS Adaptive Secondary Mirror’s actuators are controlled by a closed loop modified PID control law and an open loop feed forward law, which in combination allows for faster actuator response time. An essential element of achieving the secondary’s performance goals involves the process of PID gain tuning. To start, we briefly discuss the design of the MAPS ASM and its actuators. We then describe the actuator positional control system and control law. Next, we discuss a few of the issues that make ASM tuning difficult. We then outline our initial attempts at tuning the actuator controllers, and discuss the use of actuator positional power spectra for both tuning and determining the health and failure states of individual actuators. We conclude by presenting the results of our latest round of tuning configuration trials, which have been successful at decreasing mirror latency, increasing operational mirror modes and improving image PSF.
As wavefront quality demands tighten on space systems for applications such as astronomy and laser communication, mounting small optics such that the wavefront is undisturbed, positioning is adjustable and the design is producible, while surviving harsh space environments, is a continuing challenge. We designed multiple candidate flexure mounts to support small optics (up to 50 mm diameter, and over 100 grams) to survive the qualification and acceptance tests of small spacecraft and units as defined in ISO 19683 and a mounting structure which is adjustable in decenter [+/-0.5mm], tip/tilt +/-0.5deg, and piston [+/-0.25mm]. We will present design details along with measurements showing less than approximately lambda/10 wavefront contribution from the optic bonding process, along with thermal and multi-axis vibration test data showing the mounted optics survived the acceptance testing loads and are suitable for operation in a wide range of harsh environments.
The MMT AO exoPlanet characterization System is an upgrade for the 6.5-m MMT observatory to the 20-year-old MMTAO adaptive secondary mirror (ASM) with new electronics, a new AO system with two pyramid wavefront sensors spanning the visible through infrared, and a suite of upgraded science cameras optimized for studying the atmospheres of extrasolar planets. We began on-sky engineering and commissioning in October 2022, and have progressed through first light to calibrations at this time. The AO system is complex with its dual wavefront sensors, and the ASM can only be calibrated on-sky. We will present the current status and results of commissioning the MAPS AO system.
Understanding the noise characteristics of high quantum efficiency silicon-based ultraviolet detectors, developed by the Microdevices Lab at the Jet Propulsion Laboratory, is critical for current and proposed UV missions using these devices. In this paper, we provide an overview of our detector noise characterization test bench that uses delta-doped, photon counting, Electron-multiplying CCDs (EMCCDs) to understand the fundamental noise properties relevant to all silicon CCDs and CMOS arrays. This work attempts to identify the source of the dark current plateau that has been previously measured with photon-counting EMCCDs and is known to be prevalent in other silicon-based arrays. It is suspected that the plateau could be due to a combination of detectable photons in the tail of blackbody radiation of the ambient instrument, low-level light leaks, and a non-temperature-dependent component that varies with substrate voltage. Our innovative test setup delineates the effect of the ambient environment during dark measurements by independently controlling the temperature of the detector and surrounding environment. We present the design of the test setup and preliminary results.
The MMT Adaptive Optics exoPlanet Characterization System (MAPS) is a comprehensive update to the first generation MMT adaptive optics system (MMTAO), designed to produce a facility class suite of instruments whose purpose is to image nearby exoplanets. The system’s adaptive secondary mirror (ASM), although comprised in part of legacy components from the MMTAO ASM, represents a major leap forward in design, structure and function. The subject of this paper is the design, operation, achievements and technical issues of the MAPS adaptive secondary mirror. We discuss laboratory preparation for on-sky engineering runs, the results of those runs and the issues we discovered, what we learned about those issues in a follow up period of laboratory work, and the steps we are taking to mitigate them.
The MMT Adaptive optics exoPlanet characterization System (MAPS) is an exoplanet characterization program that encompasses instrument development, observational science, and education. The instrument we are developing for the 6.5m MMT observatory is multi-faceted, including a refurbished 336-actuator adaptive secondary mirror (ASM); two pyramid wavefront sensors (PyWFS's); a 1-kHz adaptive optics (AO) control loop; a high-resolution and long-wavelength upgrade to the Arizona infraRed Imager and Echelle Spectrograph (ARIES); and a new-AO-optimized upgrade to the MMT-sensitive polarimeter (MMT-Pol). With the completed MAPS instrument, we will execute a 60-night science program to characterize the atmospheric composition and dynamics of ~50-100 planets around other stars. The project is approaching first light, anticipated for Summer/Fall of 2022. With the electrical and optical tests complete and passing the review milestone for the ASM’s development, it is currently being tuned. The PyWFS's are being built and integrated in their respective labs: the visible-light PyWFS at the University of Arizona (UA), and the infrared PyWFS at the University of Toronto (UT). The top-level AO control software is being developed at UA, with an on-sky calibration algorithm being developed at UT. ARIES development continues at UA, and MMT-Pol development is at the University of Minnesota. The science and education programs are in planning and preparation. We will present the design and development of the entire MAPS instrument and project, including an overview of lab results and next steps.
The MMT Adaptive optics exoPlanet characterization System (MAPS) is a broad overhaul and upgrade of AO instrumentation at the 6.5-m MMT observatory, from deformable secondary mirror, through pyramid wavefront sensors in both the visible and near-infrared, to improved science cameras. MAPS is an NSF MSIP-funded program whose ultimate goal is a facility optimized for exoplanet characterization. Here we describe the laboratory testing and calibration of one MAPS component: the refurbished MMT adaptive secondary mirror (ASM). The new ASM includes a complete redesign of electronics and actuators, including simplified hub-level electronics and digital electronics incorporated into the actuators themselves. The redesign reduces total power to ⪅300W, from the original system’s 1800W, which in turn allows us to eliminate liquid cooling at the hub with no loss of performance. We present testing strategies, results, and lessons learned from laboratory experience with the MAPS ASM. We discuss calibrations first on the level of individual actuators, including capacitive position sensing, force response function, and individual closed-loop position control with an improved control law. We then describe investigations into the full ASM system – hub, actuators, thin shell, and human – to understand how to optimize interactions between components for dynamical shape control using a feedforward matrix. Finally, we present our results in the form of feedforward matrix and control law parameters that successfully produce a desired mirror surface within 1ms settling time.
MAPS, MMT Adaptive optics exoPlanet characterization System, is the upgrade of the adaptive optics system for 6.5-m MMT. It is an NSF MSIP-funded project that includes developing an adaptive-secondary mirror, visible and near-infrared pyramid wavefront sensors, and the upgrade of Arizona infrared imager and echelle spectrograph (ARIES) and MMT High Precision Imaging Polarimeter (MMTPol) science cameras. This paper will present the design and development of the visible pyramid wavefront sensor, VPWFS. It consists of an acquisition camera, a fast-steering tip-tilt modulation mirror, a pyramid, a pupil imaging triplet lens, and a low noise and high-speed frame rate based CCID75 camera. We will report on hardware and software, present the laboratory characterization results of individual subsystems, and outline the on-sky commissioning plan.
We are upgrading and refurbishing the first-generation adaptive-secondary mirror (ASM)-based AO system on the 6.5-m MMT in Arizona, in an NSF MSIP-funded program that will create a unique facility specialized for exoplanet characterization. This update includes a third-generation ASM with embedded electronics for low power consumption, two pyramid wavefront sensors (optical and near-IR), and an upgraded ARIES science camera for high-resolution spectroscopy (HRS) from 1-5 μm and MMT-POL science camera for sensitive polarization mapping. Digital electronics have been incorporated into each of the 336 actuators, simplifying hub-level electronics and reducing the total power to 300 W, down from 1800 W in the legacy system — reducing cooling requirements from active coolant to passive ambient cooling. An improved internal control law allows for electronic damping and a faster response. The dual pyramid wavefront sensors allow for a choice between optical or IR wavefront sensing depending on guide star magnitude, color, and extinction. The HRS upgrade to ARIES enables crosscorrelation of molecular templates to extract atmospheric parameters of exoplanets. The combination of these upgrades creates a workhorse instrument for exoplanet characterization via AO and HRS to separate planets from their host stars, with broad wavelength coverage and polarization to probe a range of molecular species in exoplanet atmospheres.
The Large Binocular Telescope Interferometer (LBTI) combines the light from the two 8.4 m primary mirrors of the LBT for interferometry and adaptive optics (AO) imaging. With two high performance, state-of-the-art AO systems and adaptive secondary mirrors, a cryogenic instrument, and an edge-to-edge baseline of 23 m, the LBTI is a unique instrument for sensitive, high-angular resolution and high-contrast thermal infrared observations. After the successful completion of the NASA-funded HOSTS nulling interferometry survey for exozodiacal dust, our team is now completing the commissioning and extending the capabilities of other observing modes, namely Fizeau imaging interferometry, spectro-interferometry, integral field spectroscopy, non-redundant aperture masking, and coronagraphy for general astronomical observations. In this paper we briefly review the design of the LBTI, summarize the results and performance of HOSTS, and describe the LBTI’s wider current and future capabilities.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.