The Faint Intergalactic Medium Redshifted Emission Balloon (FIREBall-2) is a UV multi-object spectrograph designed to detect emission from the circumgalactic and circumquasar medium at low redshifts (0.3 < z < 1.0). The FIREBall-2 spectrograph uses a suborbital balloon vehicle to access a stratospheric transmission window centered around 205 nm and is fed by a 1-m primary parabolic mirror and a 2-mirror field corrector that allows an ≈11’ x 35’ field of view. The slit-mask spectrograph can access dozens of galaxy targets per field, with each target spectrum read out on a UV electron-multiplying CCD detector. Following a flight in 2018, several refurbishments and modifications were made to the instrument and telescope to prepare for additional flight opportunities. Here we present an overview of upgrades and improvements made since the previous flight and discuss the 2023 field campaign, which culminated in a flight from Fort Sumner, New Mexico in September, 2023.
The Faint Intergalactic-medium Redshifted Emission Balloon (FB-2), a collaborative NASA/CNES suborbital balloon telescope, targets the mapping of faint UV emissions from the circumgalactic medium around low-redshift galaxies. The initial September 2018 flight encountered challenges, including a balloon breach and subsequent damage during landing, impacting the two large telescope mirrors and the critical focal corrector. Likely due to landing shock, the focal corrector experienced misalignment beyond tolerance, necessitating reevaluation and realignment. This paper outlines a comprehensive approach to realigning the focal corrector using a computer-generated hologram (CGH) and a Zygo interferometer for feedback. The CGH enables precise alignment corrections in various degrees of freedom, while interferometer feedback aids in reducing aberrations. The paper details the methodology for optical alignment, surface measurement, and performance evaluation of the focal corrector, emphasizing its successful integration into the FB-2 spectrograph in early 2023 for the September 2023 flight.
Understanding the noise characteristics of high quantum efficiency silicon-based ultraviolet detectors, developed by the Microdevices Lab at the Jet Propulsion Laboratory, is critical for current and proposed UV missions using these devices. In this paper, we provide an overview of our detector noise characterization test bench that uses delta-doped, photon counting, Electron-multiplying CCDs (EMCCDs) to understand the fundamental noise properties relevant to all silicon CCDs and CMOS arrays. This work attempts to identify the source of the dark current plateau that has been previously measured with photon-counting EMCCDs and is known to be prevalent in other silicon-based arrays. It is suspected that the plateau could be due to a combination of detectable photons in the tail of blackbody radiation of the ambient instrument, low-level light leaks, and a non-temperature-dependent component that varies with substrate voltage. Our innovative test setup delineates the effect of the ambient environment during dark measurements by independently controlling the temperature of the detector and surrounding environment. We present the design of the test setup and preliminary results.
Aspera is a NASA Pioneers Mission designed to measure faint OVI emission around nearby galaxies with unprecedented sensitivity. The SmallSat payload consists of two identical co-aligned spectrographs, both operating in the Far Ultraviolet (FUV) between 1030−1040 Å. Missions operating at FUV wavelengths are particularly sensitive to contamination, as short wavelengths are easily scattered and absorbed by contaminants deposited on payload optical surfaces. A strict contamination control plan is critical to avoiding a severe loss in FUV throughput. Aspera contamination control efforts have been tailored to fit within the scope of a sub-Class D mission, a challenge that has become increasingly relevant as advances in FUV optics/detectors drive an uptick in smaller platform, contamination sensitive UV payloads. Contamination monitoring is used to audit the cleanroom environment, avoid outgassing contaminants under vacuum, and assess contaminant levels on payload optics. We present a detailed contamination budget through the mission end of life as well as our ongoing contamination monitoring efforts. We discuss protocols implemented for minimizing contamination-related performance degradation.
Aspera is a NASA-funded UV SmallSat mission designed to detect and map warm-hot phase halo gas around nearby galaxies. The Aspera payload is designed to detect faint diffuse O VI emission at around 103.2 nm, satisfying the sensitivity requirement of 5×10−19 erg/s/cm2/arcsec2 over 179 hours of exposure. In this manuscript, we describe the overall payload design of Aspera. The payload comprises two identical co-aligned UV long-slit spectrograph optical channels sharing a common UV-sensitive microchannel plate detector. The design delivers spectral resolution R ∼ 2,000 over the wavelength range of 101 to 106 nm. The field of view of each channel is 1 degree by 30 arcsec, with an effective area of 1.1 cm2. The mission is now entering the payload integration and testing phase, with the projected launch-ready date set for late 2025 or early 2026. The mission will be launched into low-Earth orbit via rideshare.
Aspera is a NASA Astrophysics Pioneers SmallSat mission designed to study diffuse Ovi emission from the warm-hot phase gas in the halos of nearby galaxies. Its payload consists of two identical Rowland Circle-type long-slit spectrographs, sharing a single MicroChannel plate detector. Each spectrograph channel consists of an off-axis parabola primary mirror and a toroidal diffraction grating optimized for the 1013-1057 Å bandpass. Despite the simple configuration, the optical alignment/integration process for Aspera is challenging due to tight optical alignment tolerances, driven by the compact form factor, and the contamination sensitivity of the Far-Ultraviolet optics and detectors. In this paper, we discuss implementing a novel multi-phase approach to meet these requirements using state-of-the-art optical metrology tools. For coarsely positioning the optics we use a blue-laser 3D scanner while the fine alignment is done with a Zygo interferometer and a custom computer-generated hologram. The detector focus requires iterative in-vacuum alignment using a Vacuum UV collimator. The alignment is done in a controlled cleanroom facility at the University of Arizona.
We present the integration of a new calibration system into the Faint Intergalactic-medium Redshifted Emission Balloon-2 (FIREBall-2), which added in-flight calibration capability for the recent September 2023 flight. This system is composed of a calibration source box containing zinc and deuterium lamp sources, focusing optics, electronics, sensors, and a fiber-fed calibration cap with an optical shutter mounted on the spectrograph tank. We discuss how the calibration cap is optimized to be evenly illuminated through non-sequential modeling for the near-UV (191 to 221 nm) for spectrograph slit mask position calibration, electron multiplying charged-coupled device (EMCCD) gain amplification verification, and wavelength calibration. Then, we present the pre-flight performance testing results of the calibration system and their implications for in-flight measurements. FIREBall-2 flew in 2023, but did not collect calibration data due to early termination of the flight.
The Circumgalactic H-alpha Spectrograph (CHαS) is a ground-based, narrowband optical integral field spectrograph designed to observe ultra-faint extended emission from ionized gas in the nearby universe. Commissioned for use as a facility instrument at MDM observatory, we are currently surveying nearby galaxies to produce deep H-alpha images and velocity maps, complemented with observations in other wavelengths. We present our work developing a robust analysis pipeline for CHαS, providing a toolkit to process images with densely-packed, spatially-resolved spectra. The pipeline includes techniques for astrometric refinement, wavelength mapping and distortion calibration of arrayed spectral images, as well as manipulations in Fourier space. With these, we are able to optimize our image registration and stacking procedures, sky background removal and spectral cube extraction for the tightly packed microlens array images. We highlight results using 5-10h deep image stacks and demonstrate results from cross-correlation with imaging and spectral data from other astronomical surveys.
The Circumgalactic Hα Spectrograph (CHαS) is a new narrowband integral field spectrograph optimized for observing faint emission from the ionized circumgalactic medium (CGM) of nearby galaxies. CHαS is deployed on the 2.4m Hiltner telescope at MDM Observatory in Arizona, where we are conducting an initial science survey collecting deep spectral imaging of 10 galaxies in Ha emission. Here we debut the commissioning of a blue channel, extending the spectral coverage to include Hβ and OIII emission. We present modeling for new narrowband filters that can tilt in order to center on different wavelengths, expanding our range of observable redshifts while limiting spectral overlap. Finally, we discuss the development of an actuated lenslet array mount to precisely shift the lenslet array across the focal plane, offsetting instrument flexure. CHαS will be an ideal test-bed for new focal plane and detector technologies as we develop it into a facility instrument at MDM Observatory.
The integration of a new calibration system into FIREBall-2 (Faint Intergalactic Redshifted Emission Balloon-2) allows in-flight calibration capability for the upcoming Fall 2023 flight. This system is made up of a calibration box that contains zinc and deuterium lamp sources, focusing optics, electronics, and sensors, and a fiber-fed calibration cap with an optical shutter mounted on the spectrograph tank. We discuss how the calibration cap is optimized to be evenly illuminated through nonsequential modeling for the near-UV (200-208nm). Then, we present the pre-flight performance testing results of the calibration system and their implications for in-flight measurements.
We present a comprehensive stray light analysis and mitigation strategy for the FIREBall-2 ultraviolet balloon telescope. Using nonsequential optical modeling, we identified the most problematic stray light paths, which impacted telescope performance during the 2018 flight campaign. After confirming the correspondence between the simulation results and postflight calibration measurements of stray light contributions, a system of baffles was designed to minimize stray light contamination. The baffles were fabricated and coated to maximize stray light collection ability. Once completed, the baffles will be integrated into FIREBall-2 and tested for performance preceding the upcoming flight campaign. Given our analysis results, we anticipate a substantial reduction in the effects of stray light.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.