Paper
29 August 2006 Surface gradient integrated profiler for x-ray and EUV optics: 3D mapping of 1m-long flat mirror and off-axis parabolic mirror
Y. Higashi, Y. Takaie, K. Endo, T. Kume, K. Enami, K. Yamauchi, K. Yamamura, H. Sano, J. Uchikoshi, K. Ueno, Y. Mori
Author Affiliations +
Abstract
A new ultra-precision profiler has been developed in order to measure such as asymmetric and aspheric profiles. In the present study, the normal vectors at each points on the surface are determined by the reflected light beam goes back exactly on the same path as the incident beam. The surface gradients at each point are calculated from the normal vector and the surface profile is obtained by integrating the gradient. The measuring instrument was designed according to the above principle of the measuring method. In the design, four ultra-precision goniometers were applied to the adjustment of the light axis for the normal vector measurement. The angle positioning resolution and accuracy of each goniometer are respectively 0.018 μrad and 0.2 μrad. In the measuring instrument, the most important item is the measuring accuracy of the normal vectors by the goniometers. Therefore, the rotating angle positioning errors were measured and calibrated. Then the measurement of a concave mirror with 300 mm radius and 460mm, 1m long plane mirrors were measured. Then, The 3D surface profile of the mirror such 1m-long flat mirror, a concave mirror with 2000 mm radius and off-axis parabolic mirror are obtained by integrating the interpolated gradient.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Y. Higashi, Y. Takaie, K. Endo, T. Kume, K. Enami, K. Yamauchi, K. Yamamura, H. Sano, J. Uchikoshi, K. Ueno, and Y. Mori "Surface gradient integrated profiler for x-ray and EUV optics: 3D mapping of 1m-long flat mirror and off-axis parabolic mirror", Proc. SPIE 6317, Advances in X-Ray/EUV Optics, Components, and Applications, 63170B (29 August 2006); https://doi.org/10.1117/12.680245
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Off axis mirrors

3D metrology

Spherical lenses

Wavefronts

Phase shifts

Photography

Back to Top