SOXS (Son Of X-Shooter) is the new ESO instrument that is going to be installed on the 3.58-m New Technology Telescope at the La Silla Observatory. SOXS is a single object spectrograph offering a wide simultaneous spectral coverage from U- to H-band. Although such an instrument may have potentially a large variety of applications, the consortium designed it with a clear science case: it is going to provide the spectroscopic counterparts to the ongoing and upcoming imaging surveys, becoming one of the main follow-up instruments in the Southern hemisphere for the classification and characterization of transients. The NTT+SOXS system is specialized to observe all transients and variable sources discovered by imaging surveys with a flexible schedule maintained by the consortium, based on a remote scheduler which will interface with the observatory software infrastructure. SOXS is realized timely to be highly synergic with transients discovery machines like the Vera C. Rubin Observatory. The instrument has been integrated and tested in Italy, collecting and assembling subsystems coming from all partners spread over six countries in three continents. The first preparatory activities in Chile have been completed at the telescope. This article gives an updated status of the project before the shipping of the instrument to Chile.
REMIR is a NIR camera mounted on the REM telescope at ESO-La Silla Observatory. Soon after its installation in 2003, the REMIR camera went through a series of cryogenics problems, due to the bad functioning of the Leybold cryocooler Polar SC7 and we were forced to change drastically the cryogenics of REMIR, going from cryocooler to LN2, via an ad-hoc modified Continuos Flow Criostat, a cryogenics system developed by ESO. Today, the availability of new generation small cryocoolers, in our case the Sunpower CryoTel GT AVC, allowed us to change again and come back to the original cryogenics for the REMIR camera. The system has been assembled and intensively tested at ESO and at INAF-OAR premises, then it has been mounted on the REMIR camera and tested at working condition. In this paper we report the details and results of the project.
NIRPS is a fiber-fed AO nIR spectrograph working simultaneously with HARPS at the La Silla-ESO 3.6m telescope. The cryogenic spectrograph operating at 75K employs a cross-dispersed echelle grating (R4), covering a wavelength range of 0.98-1.80 microns in a single image using a Teledyne Hawaii-4RG infrared detector. In early 2022, the NIRPS spectrograph was transported to Chile by plane with all the optical elements mechanically attached to the optical bench inside the vaccum vessel. To ensure the safety of the spectrograph, dedicated work was performed on the shipping crate design, which could survive up to 7g shocks. In La Silla, the vacuum vessel was re-integrated on its support structure and the spectrograph alignment was verified with the H4RG and the injection module. Given the optical design, the alignment phase was performed using a metrology arm and a few optical tests, which minimize the time required for this critical phase. From the validation/technical phase results, two major modifications were required. Firstly, the original grating element was replaced by a new etched crystalline silicon component made by the Fraunhofer Institute for Applied Optics and Precision Engineering. A novel technique was developed to verify the alignment at a warm temperature with the H4RG detector. Secondly, a thermal enclosure was added around the vacuum vessel to optimize thermal stability. Since then, the long-term thermal stability has been better than 0.2mK over 20 days. In this paper, we will review the final spectrograph performances, prior to shipping, and describe the novel techniques developed to minimize shipping costs, AITV phase duration, and grating replacement at the observatory. Additionally, we will discuss the thermal enclosure design to achieve the sub-mK thermal stability.
The FORS Upgrade project (FORS-Up) aims at bringing a new life to the highly demanded workhorse instrument attached to ESO’s Very Large Telescope (VLT). FORS2 is a multimode optical instrument, which started regular science operations in 2000 and since then, together with its twin, FORS1, has been one of the most demanded and most productive instruments of the VLT. In order to ensure that a FORS shall remain operational for at least another 15 years, an upgrade has been planned. This is required as FORS2 is using technology and software that is now obsolete and cannot be put and maintained to the standards in use at the Observatory. The project – carried out as a collaboration between ESO and INAF– Astronomical Observatory of Trieste – aims at bringing to the telescope in 2023/2024 a refurbished instrument with a new scientific detector, an upgrade of the instrument control software and electronics, a new calibration unit, as well as additional filters and grisms. The new FORS will also serve as a test bench for the Extremely Large Telescope (ELT) standard technologies (among them the use of programmable logic controllers and of the features of the ELT Control Software). The project aims at minimising the downtime of the instrument by performing the upgrade on the currently decommissioned instrument FORS1 and retrofitting the Mask Exchange Unit and polarisation optics from FORS2 to FORS1.
With expanding sizes and increasing complexity of large astronomical observatories on remote observing sites, the call for an efficient and recourses saving maintenance concept becomes louder. The increasing number of subsystems on telescopes and instruments forces large observatories, like in industries, to rethink conventional maintenance strategies for reaching this demanding goal. The implementation of full-, or semi-automatic processes for standard service activities can help to keep the number of operating staff on an efficient level and to reduce significantly the consumption of valuable consumables or equipment. In this contribution we will demonstrate on the example of the 80 Cryogenic subsystems of the ALMA Front End instrument, how an implemented automatic service process increases the availability of spare parts and Line Replaceable Units. Furthermore how valuable staff recourses can be freed from continuous repetitive maintenance activities, to allow focusing more on system diagnostic tasks, troubleshooting and the interchanging of line replaceable units. The required service activities are decoupled from the day-to-day work, eliminating dependencies on workload peaks or logistic constrains. The automatic refurbishing processes running in parallel to the operational tasks with constant quality and without compromising the performance of the serviced system components. Consequentially that results in an efficiency increase, less down time and keeps the observing schedule on track. Automatic service processes in combination with proactive maintenance concepts are providing the necessary flexibility for the complex operational work structures of large observatories. The gained planning flexibility is allowing an optimization of operational procedures and sequences by considering the required cost efficiency.
We present an overview of the VISIR upgrade project. VISIR is the mid-infrared imager and spectrograph at ESO’s
VLT. The project team is comprised of ESO staff and members of the original VISIR consortium: CEA Saclay and
ASTRON. The project plan is based on input from the ESO user community with the goal of enhancing the scientific
performance and efficiency of VISIR by a combination of measures: installation of improved hardware, optimization of
instrument operations and software support. The cornerstone of the upgrade is the 1k by 1k Si:As Aquarius detector
array (Raytheon) which has demonstrated very good performance (sensitivity, stability) in the laboratory IR detector test
facility (modified TIMMI 2 instrument). A prism spectroscopic mode will cover the N-band in a single observation. New
scientific capabilities for high resolution and high-contrast imaging will be offered by sub-aperture mask (SAM) and
phase-mask coronagraphic (4QPM/AGPM) modes. In order to make optimal use of favourable atmospheric conditions a
water vapour monitor has been deployed on Paranal, allowing for real-time decisions and the introduction of a userdefined
constraint on water vapour. Improved pipelines based on the ESO Reflex concept will provide better support to
astronomers. The upgraded VISIR will be a powerful instrument providing background limited performance for
diffraction-limited observations at an 8-m telescope. It will offer synergy with facilities such as ALMA, JWST, VLTI
and SOFIA, while a wealth of targets is available from survey work (e.g. VISTA, WISE). In addition it will bring
confirmation of the technical readiness and scientific value of several aspects of potential mid-IR instrumentation at
Extremely Large Telescopes. The intervention on VISIR and installation of hardware has been completed in July and
commissioning will take place during July and August. VISIR is scheduled to be available to the users starting Oct 2012.
The Cryogenic System of ALMA is one of the core sub systems of the Front End low noise receiver and the failsafe
operation is mandatory to ensure the successful astronomical observations. ESO has done a comprehensive test
campaign on the ALMA operational site Chajnantor1 at an altitude of 5000m, to qualify this system for the harsh
operational conditions.
In this contribution we will present an overview of those Qualification tests which have been carried out on ALMA`s 4K
Cryogenic and Vacuum System components and the additional required measures to operate the system under the special
environmental conditions, respectively the operational constrains. That will include the findings concerning the
optimization of the remote diagnostic and the definition of additional monitor and control parameters. The resulting
solutions have considerable influence on the maintenance processes, the operational staff requirements and the reduction
of the operational costs in particularly with regards to the large system number of 66 antennas.
The Change from a reacting to a proactive maintenance concept represents for large Observatories at remote operational
sites a new challenge, considering the increasing numbers of complex subsystems. Conventional operational
maintenance models will not cover all the requirements, will lead to more down time and the operational cost cannot be
reduced. For the successful astronomical observation with large telescope facilities new strategies have to be applied. In
this contribution we will demonstrate on the example of the 78 Cryogenic Sub-systems of ALMA how a proactive
maintenance strategy help to increase the efficiency, to reduce the operational cost and the required staff resources. With
respect to the growing number of complex subsystems on future telescope facilities the operational staff needs proper
diagnostic and monitoring tools to allow a precise prediction respectively synchronization of the service activities. This
leads away from a pure scheduling of preventive maintenance and enables a longer availability of the subsystems as
tendencies and performance are monitored and controlled. Having this strategy considered during the developing phase
of future large astronomical facilities allows the optimization of the required Infrastructure, a proper definition of the
LRU1 strategy and to which level maintenance can be cost efficient on site.
The ESO Adaptive Optics Facility (AOF) consists in an evolution of one of the ESO VLT unit telescopes to a laser
driven adaptive telescope with a deformable mirror in its optical train, in this case the secondary 1.1m mirror, and four
Laser Guide Stars (LGSs). This evolution implements many challenging technologies like the Deformable Secondary
Mirror (DSM) including a thin shell mirror (1.1 m diameter and 2mm thin), the high power Na lasers (20W), the low
Read-Out Noise (RON) WaveFront Sensor (WFS) camera (< 1e-) and SPARTA the new generation of Real Time
Computers (RTC) for adaptive control. It also faces many problematic similar to any Extremely Large Telescope (ELT)
and as such, will validate many technologies and solutions needed for the European ELT (E-ELT) 42m telescope. The
AOF will offer a very large (7 arcmin) Field Of View (FOV) GLAO correction in J, H and K bands (GRAAL+Hawk-I),
a visible integral field spectrograph with a 1 arcmin GLAO corrected FOV (GALACSI-MUSE WFM) and finally a
LTAO 7.5" FOV (GALACSI-MUSE NFM). Most systems of the AOF have completed final design and are in
manufacturing phase. Specific activities are linked to the modification of the 8m telescope in order to accommodate the
new DSM and the 4 LGS Units assembled on its Center-Piece. A one year test period in Europe is planned to test and
validate all modes and their performance followed by a commissioning phase in Paranal scheduled for 2014.
OmegaCAM is a wide field camera housing a mosaic of 32 CCD detectors. For the optimal trade-off between dark
current, sensitivity, and cosmetics, these detectors need to be operated at a temperature of about 155 K. The detectors
mosaic with a total area of 630 cm2 directly facing the Dewar entrance window, is exposed to a considerable radiation
heat load. This can only be achieved with a very performing cooling system.
The paper describes the cooling system, which is build such that it makes the most efficient use of the cooling power of
the liquid nitrogen. This is obtained by forcing the nitrogen through a series of well designed and strategically distributed
heat exchangers.
Results and performance of the system recorded during the laboratory system testing are reported as well. In addition to
the cryogenic performance, the document reports also about the overall performance of the instrument including long
term vacuum behavior.
Two teams of scientists and engineers at Max Planck Institut fuer Extraterrestrische Physik and at the European Southern Observatory have joined forces to design, build and install the Laser Guide Star Facility for the VLT.
The Laser Guide Star Facility has now been completed and installed on the VLT Yepun telescope at Cerro Paranal. In this paper we report on the first light and first results from the Commissioning of the LGSF.
HAWK-I is a new wide-field infrared camera under development at ESO. With four Hawaii-2RG detectors, a 7.5 arcminute square field of view and 0.1 arcsecond pixels, it will be an optimum imager for the VLT, and a major enhancement to existing and future infrared capabilities at ESO. HAWK-I will eventually make use of ground-layer AO achieved through a deformable secondary mirror/laser guide star facility planned for the VLT.
We describe the design and performance of a resonant electro-optical modulator, based on stoichiometric lithium tantalate, capable of handling high optical powers and providing a large modulation depth. This phase modulator is part of the single-mode fiber relay used in the ESO VLT Laser Guide Star Facility for adaptive optics to transport 589-nm laser light from the PARSEC dye laser installed in the laser clean room to the laser launch telescope. The purpose of the phase modulator is to broaden the single-frequency PARSEC laser linewidth before the laser light is injected into the single-mode relay fiber. By this the power handling capability of the single-mode fiber is increased by a factor of 3 or 10 W of in-coupled power at 589 nm, while maintaining the excitation efficiency of the mesospheric sodium D2 transition.
A 16K x 16K, 1 degree x 1 degree field, detector system was developed by ESO for the OmegaCAM instrument for use on the purpose built ESO VLT Survey Telescope (VST). The focal plane consists of an 8 x 4 mosaic of 2K x 4K 15um pixel e2v CCDs and four 2K x 4K CCDs on the periphery for the opto-mechanical control of the telescope. The VST is a single instrument telescope. This placed stringent reliability requirements on the OmegaCAM detector system such as 10 years lifetime and maximum downtime of 1.5 %. Mounting at Cassegrain focus required a highly autonomous self-contained cooling system that could deliver 65 W of cooling power. Interface space for the detector head was severely limited by the way the instrument encloses the CCD cryostat. The detector system features several novel ideas tailored to meet these requirements and described in this paper:
Key design drivers of the detector head were the easily separable but precisely aligned connections to the optical field flattener on the top and the cooling system at the bottom. Material selection, surface treatment, specialized coatings and in-situ plasma cleaning were crucial to prevent contamination of the detectors. Inside the cryostat, cryogenic and electrical connections were disentangled to keep the configuration modular, integration friendly and the detectors in a safe condition during all mounting steps. A compact unit for logging up to 125 Pt100 temperature sensors and associated thermal control loops was developed (ESO's new housekeeping unit PULPO 2), together with several new modular Pt100 packaging and mounting concepts. The electrical grouping of CCDs based on process parameters and test results is explained. Three ESO standardized FIERA CCD controllers in different configurations are used. Their synchronization mechanism for read-out is discussed in connection with the CCD grouping scheme, the shutter, and the integrated guiding and image analysis facility with four independent 2K x 4K CCDs. An illustration of the data chain performance from CCD output to storage on hard-disk gives an impression of the challenge to shift 512 MB of data within 45 seconds via the standardized hierarchical ESO data acquisition network. Finally the safety and emergency features of the overall system are presented.
In April and August ’03 two MACAO-VLTI curvature AO systems were installed on the VLT telescopes unit 2 and 3 in Paranal (Chile). These are 60 element systems using a 150mm bimorph deformable mirror and 60 APD’s as WFS detectors. Valuable integration & commissioning experience has been gained during these 2 missions. Several tests have been performed in order to evaluate system performance on the sky. The systems have proven to be extremely robust, performing in a stable fashion in extreme seeing condition (seeing up to 3”). Strehl ratio of 0.65 and residual tilt smaller than 10 mas have been obtained on the sky in 0.8” seeing condition. Weak guide source performance is also excellent with a strehl of 0.26 on a V~16 magnitude star. Several functionalities have been successfully tested including: chopping, off-axis guiding, atmospheric refraction compensation etc. The AO system can be used in a totally automatic fashion with a small overhead: the AO loop can be closed on the target less than 60 sec after star acquisition by the telescope. It includes reading the seeing value given by the site monitor, evaluate the guide star magnitude (cycling through neutral density filters) setting the close-loop AO parameters (system gain and vibrating membrane mirror stroke) including calculation of the command-matrix. The last 2 systems will be installed in August ’04 and in the course of 2005.
HAWK-I (High Acuity, Wide field K-band Imaging) is a 0.9 μm - 2.5 μm wide field near infrared imager designed to sample the best images delivered over a large field of 7.5 arcmin x 7.5 arcmin. HAWK-I is a cryogenic instrument to be installed on one of the Very Large Telescope Nasmyth foci. It employs a catadioptric design and the focal plane is equipped with a mosaic of four HAWAII 2 RG arrays. Two filter wheels allow to insert broad band and narrow band filters. The instrument is designed to remain compatible with an adaptive secondary system under study for the VLT.
CRIRES is a cryogenic, pre-dispersed, infrared echelle spectrograph designed to provide a resolving power lambda/(Delta lambda) of 105 between 1 and 5mu m at the Nasmyth focus B of the 8m VLT unit telescope #1 (Antu). A curvature sensing adaptive optics system feed is used to minimize slit losses and to provide diffraction limited spatial resolution along the slit. A mosaic of 4 Aladdin~III InSb-arrays packaged on custom-fabricated ceramics boards has been developed. This provides for an effective 4096x512 pixel focal plane array, to maximize the free spectral range covered in each exposure. Insertion of gas cells to measure high precision radial velocities is foreseen. For measurement of circular polarization a Fresnel rhomb in combination with a Wollaston prism for magnetic Doppler imaging is foreseen. The implementation of full spectropolarimetry is under study. This is one result of a scientific workshop held at ESO in late 2003 to refine the science-case of CRIRES. Installation at the VLT is scheduled during the first half of 2005. Here we briefly recall the major design features of CRIRES and describe its current development status including a report of laboratory testing.
For the high-resolution IR Echelle Spectrometer CRIRES (1-5 μm range), to be installed at the VLT in 2005, ESO is developing a 512 x 4096 pixels focal plane array mosaic based on Raytheon Aladdin III InSb detectors with a cutoff wavelength of 5.2 microns. To fill the useful field of 135 mm in the dispersion direction and 21 mm in the spatial direction and to maximize simultaneous spectral coverage, a mosaic solution similar to CCD mosaics has been chosen. It allows a minimum spacing between the detectors of 264 pixels. ESO developed a 3-side buttable mosaic package for both the Aladdin II and Aladdin III detectors which are mounted on multilayer co-fired AlN ceramic chip carriers. This paper presents the design of the CRIRES 512 x 4096 pixel Aladdin InSb focal plane array and a new test facility for testing mosaic focal planes under low flux conditions.
MACAO stands for Multi Application Curvature Adaptive Optics. A similar concept is applied to fulfill the need for wavefront correction for several VLT instruments. MACAO-VLTI is one of these built in 4 copies in order to equip the Coude focii of the ESO VLT's. The optical beams will then be corrected before interferometric recombination in the VLTI (Very Large Telescope Interferometer) laboratory. MACAO-VLTI uses a 60 elements bimorph mirror and curvature wavefront sensor. A custom made board processes the signals provided by the wavefront detectors, 60 Avalanche Photo-diodes, and transfer them to a commercial Power PC CPU board for Real Time Calculation. Mirrors Commands are sent to a High Voltage amplifier unit through an optical fiber link. The tip-tilt correction is done by a dedicated Tip-tilt mount holding the deformable mirror. The whole wavefront is located at the Coude focus. Software is developed in house and is ESO compatible. Expected performance is a Strehl ratio sligthly under 60% at 2.2 micron for bright reference sources (star V<10) and a limiting magnitude of 17.5 (Strehl ~0.1). The four systems will be installed in Paranal successively, the first one being planned for June 2003 and the last one for June 2004.
For the next generation of instruments which will be used at 8 m telescopes large format arrays are needed. Better image quality obtained by adaptive optics requires sampling to higher spatial frequencies. The large field of these instruments increases the demand for array formats as large as 1024 by 1024 and beyond. For this reason ESO is committed to the development of megapixel infrared detectors. In a multimode instrument covering the 1 to 5 micrometer spectral range a detector has to fulfill very different requirements. For high resolution spectroscopy low dark current and read noise are required. For broad band thermal imaging a high well capacity is needed to reduce the speed required to read out the array before it saturates. This paper gives a status report of ESO's activities related to large format arrays. An ultrafast data acquisition system has been developed to read out large format arrays. The performance goal is to achieve shot noise limited operation in the wavelength region of lambda equals 1 to 5 micrometer. The array controller is capable of handling the high data rates generated in the thermal infrared. The design of the controller was mainly driven by the requirement to read out the 32 parallel video channels of the SBRC 1024 by 1024 InSb detector in 50 msec. The array controller can also cope with the low read noise required for flux levels of less than 1 photon/sec. A new test camera for large format arrays has also been built. First test results obtained with the Rockwell 1024 by 1024 HgCdTe array are presented. The noise and dark current performance will be discussed with regard to OH line suppression. Read speed requirements will be defined for advanced readout techniques of image sharpening applying on chip tracking in the multiple nondestructive readout mode.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.