LiteBIRD is a JAXA-led international project that aims to test representative inflationary models by performing an allsky cosmic microwave background radiation (CMB) polarization survey for 3 years at the Sun-Earth Lagrangian point L2. We aim to launch LiteBIRD in the late 2020s. The payload module (PLM) is mainly composed of the Low-Frequency Telescope (LFT), the Mid-Frequency Telescope and High-Frequency Telescope (MHFT), and a cryo-structure. To conduct the high-precision and high-sensitivity CMB observations, it is required to cool the telescopes down to less than 5 K and the detectors down to 100 mK. The high temperature stability is also an important design factor. It is essential to design and analyze the cryogenic thermal system for PLM. In this study, the heat balance, temperature distribution, and temperature stability of the PLM for the baseline design are evaluated by developing the transient thermal model. The effect of the Joule-Thomson (JT) coolers cold tip temperature variation, the periodical changes in subK Adiabatic Demagnetization Refrigerator (ADR) heat dissipation, and the satellite spin that generates the variable direction of solar flux incident are implemented in the model. The effect of contact thermal conductance in the LFT and the emissivity of the V-groove on the temperature distribution and heat balance are investigated. Based on the thermal analysis, it was confirmed that the PLM baseline design meets the requirement of the temperature and the cooling capability of the 4K-JT cooler. In addition, the temperatures of the V-groove and the LFT 5-K frame are sufficiently stable for the observation. The temperature stability of the Low Frequency Focal Plane (LF-FP) is also discussed in this paper.
LiteBIRD is a spacecraft to observe the polarization signal of the cosmic microwave background radiation (CMB). In the development of its payload module, it is important to design the mechanical structures with enough rigidity to withstand the launch environment while providing enough thermal insulation to cool the telescopes down to 5 K. We need to reduce the mass of the 5-K structure, which consists of three telescopes, the low-frequency telescope (LFT) led by JAXA and the mid-frequency and high-frequency telescopes (MFT and HFT) led by CNES. In this paper, we report the mechanical design of the LFT and the structural analysis using Nastran. We made a structural mathematical model of the LFT and performed modal and quasi-static analyses. We successfully reduced the LFT mass while keeping the natural resonance frequency higher than requirements. Additionally, we report the mechanical design and the current status of the structural analysis for the payload module.
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 μK-arcmin with a typical angular resolution of 0.5° at 100 GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
LiteBIRD has been selected as JAXA’s strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) B-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of -56 dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34–161 GHz), one of LiteBIRD’s onboard telescopes. It has a wide field-of-view (18° x 9°) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90◦ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at 5 K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
The Space Infrared Telescope for Cosmology and Astrophysics (SPICA) mission is to be launched into orbit around the second Lagrangian point (L2) in the Sun-Earth system. Taking advantage of the thermal environment in L2, a 2.5m-class large IR telescope is cooled below 8K in combination with effective radiant cooling and a mechanical cooling system. SPICA adopts a cryogen-free system to prevent the mission operation lifetime being limited by the amount of cryogen as a refrigerant. Currently, the mechanical cooler system with the feasible solution giving a proper margin is proposed. As a baseline design, 4K / 1K-class Joule-Thomson coolers are used to cool the telescope and thermal interface for Focal Plane Instruments (FPIs). Additionally, two sets of double stage stirling coolers (2STs) are used to cool the telescope shield. In this design, nominal operation of FPIs can be kept when one mechanical cooler is in failure. In this paper, current baseline configuration of the mechanical cooler system and current status of mechanical coolers developments which need to satisfy the specific requirements of SPICA cryogenic system are presented.
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34 GHz to 448 GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium-and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89{224 GHz) and the High-Frequency Telescope (166{448 GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5 K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100 mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
We present an overview of the cryogenic system of the next-generation infrared observatory mission SPICA. One of the most critical requirements for the SPICA mission is to cool the whole science equipment, including the 2.5 m telescope, to below 8 K to reduce the thermal background and enable unprecedented sensitivity in the mid- and far-infrared region. Another requirement is to cool focal plane instruments to achieve superior sensitivity. We adopt the combination of effective radiative cooling and mechanical cryocoolers to accomplish the thermal requirements for SPICA. The radiative cooling system, which consists of a series of radiative shields, is designed to accommodate the telescope in the vertical configuration. We present thermal model analysis results that comply with the requirements to cool the telescope and focal plane instruments.
The mid/far infrared hosts a wealth of spectral information that allows direct determination of the physical state of matter in a large variety of astronomical objects, unhindered by foreground obscuration. Accessing this domain is essential for astronomers to much better grasp the fundamental physical processes underlying the evolution of many types of celestial objects, ranging from protoplanetary systems in our own milky way to 10-12 billion year old galaxies at the high noon of galaxy formation in our universe. The joint ESA/JAXA SPICA mission will give such access for the astronomical community at large, by providing an observatory with unprecedented mid- to far-infrared imaging, polarimetric and spectroscopic capabilities.
LiteBIRD is a candidate for JAXA’s strategic large mission to observe the cosmic microwave background (CMB) polarization over the full sky at large angular scales. It is planned to be launched in the 2020s with an H3 launch vehicle for three years of observations at a Sun-Earth Lagrangian point (L2). The concept design has been studied by researchers from Japan, U.S., Canada and Europe during the ISAS Phase-A1. Large scale measurements of the CMB B-mode polarization are known as the best probe to detect primordial gravitational waves. The goal of LiteBIRD is to measure the tensor-to-scalar ratio (r) with precision of r < 0:001. A 3-year full sky survey will be carried out with a low frequency (34 - 161 GHz) telescope (LFT) and a high frequency (89 - 448 GHz) telescope (HFT), which achieve a sensitivity of 2.5 μK-arcmin with an angular resolution 30 arcminutes around 100 GHz. The concept design of LiteBIRD system, payload module (PLM), cryo-structure, LFT and verification plan is described in this paper.
We present an overview of the thermal and mechanical design of the Payload Module (PLM) of the next- generation infrared astronomy mission Space Infrared Telescope for Cosmology and Astrophysics (SPICA). The primary design goal of PLM is to cool the whole science assembly including a 2.5 m telescope and focal-plane instruments below 8 K. SPICA is thereby expected to have very low background conditions so that it can achieve unprecedented sensitivity in the mid- and far-infrared. PLM also provides the instruments with the 4.8 K and 1.8 K stages to cool their detectors. The SPICA cryogenic system combines passive, effective radiative cooling by multiple thermal shields and active cooling by a series of mechanical cryocoolers. The mechanical cryocoolers are required to provide 40 mW cooling power at 4.8 K and 10 mW at 1.8 K at End-of-Life (EoL). End-to-end performance of the SPICA cryocooler-chain from 300 K to 50 mK was demonstrated under the framework of the ESA CryoChain Core Technology Program (CC-CTP). In this paper, we focus on the recent progress of the thermal and mechanical design of SPICA PLM which is based on the SPICA mission proposal to ESA.
Measurements in the infrared wavelength domain allow us to assess directly the physical state and energy balance of cool matter in space, thus enabling the detailed study of the various processes that govern the formation and early evolution of stars and planetary systems in the Milky Way and of galaxies over cosmic time. Previous infrared missions, from IRAS to Herschel, have revealed a great deal about the obscured Universe, but sensitivity has been limited because up to now it has not been possible to fly a telescope that is both large and cold. Such a facility is essential to address key astrophysical questions, especially concerning galaxy evolution and the development of planetary systems.
SPICA is a mission concept aimed at taking the next step in mid- and far-infrared observational capability by combining a large and cold telescope with instruments employing state-of-the-art ultra-sensitive detectors. The mission concept foresees a 2.5-meter diameter telescope cooled to below 8 K. Rather than using liquid cryogen, a combination of passive cooling and mechanical coolers will be used to cool both the telescope and the instruments. With cooling not dependent on a limited cryogen supply, the mission lifetime can extend significantly beyond the required three years. The combination of low telescope background and instruments with state-of-the-art detectors means that SPICA can provide a huge advance on the capabilities of previous missions.
The SPICA instrument complement offers spectral resolving power ranging from ~50 through 11000 in the 17-230 µm domain as well as ~28.000 spectroscopy between 12 and 18 µm. Additionally, SPICA will be capable of efficient 30-37 µm broad band mapping, and small field spectroscopic and polarimetric imaging in the 100-350 µm range. SPICA will enable far infrared spectroscopy with an unprecedented sensitivity of ~5x10-20 W/m2 (5σ/1hr) - at least two orders of magnitude improvement over what has been attained to date. With this exceptional leap in performance, new domains in infrared astronomy will become accessible, allowing us, for example, to unravel definitively galaxy evolution and metal production over cosmic time, to study dust formation and evolution from very early epochs onwards, and to trace the formation history of planetary systems.
The Hitomi (ASTRO-H) mission is the sixth Japanese x-ray astronomy satellite developed by a large international collaboration, including Japan, USA, Canada, and Europe. The mission aimed to provide the highest energy resolution ever achieved at E > 2 keV, using a microcalorimeter instrument, and to cover a wide energy range spanning four decades in energy from soft x-rays to gamma rays. After a successful launch on February 17, 2016, the spacecraft lost its function on March 26, 2016, but the commissioning phase for about a month provided valuable information on the onboard instruments and the spacecraft system, including astrophysical results obtained from first light observations. The paper describes the Hitomi (ASTRO-H) mission, its capabilities, the initial operation, and the instruments/spacecraft performances confirmed during the commissioning operations for about a month.
We present the new design of the cryogenic system of the next-generation infrared astronomy mission SPICA under the
new framework. The new design employs the V-groove design for radiators, making the best use of the Planck heritage.
The new design is based on the ESA-JAXA CDF study (NG-CryoIRTel, CDF-152(A)) with a 2 m telescope, and we
modified the CDF design to accommodate the 2.5 m telescope to meet the science requirements of SPICA. The basic
design concept of the SPICA cryogenic system is to cool the Science Instrument Assembly (SIA, which is the
combination of the telescope and focal-plane instruments) below 8K by the combination of the radiative cooling system
and mechanical cryocoolers without any cryogen.
KEYWORDS: Infrared telescopes, Space telescopes, Telescopes, Optical instrument design, Cryogenics, Infrared radiation, Cooling systems, Space telescopes, Cryogenics, Electrical breakdown, James Webb Space Telescope, Space operations
The Space Infrared Telescope for Cosmology and Astrophysics (SPICA) is a pre-project of JAXA in collaboration
with ESA to be launched in the 2020s. The SPICA mission is to be launched into a halo orbit around
the second Lagrangian point in the Sun-Earth system, which allows us to use effective radiant cooling in combination
with a mechanical cooling system in order to cool a 2.5m-class large IR telescope below 8K. Recently,
a new system design in particular thermal structure of the payload module has been studied by considering
the technical feasibility of a cryogenic cooled telescope within current constraints of the mission in the CDF
(Concurrent Design Facility) study of ESA/ESTEC. Then, the thermal design of the mechanical cooler system,
for which the Japanese side is responsible, has been examined based on the CDF study and the feasible
solution giving a proper margin has been obtained. As a baseline, 4K / 1K-class Joule-Thomson coolers are
used to cool the telescope and thermal interface for Focal Plane Instruments (FPIs). Additionally, two sets of
double stirling coolers (2STs) are used to cool the Telescope shield. In this design, nominal operation of FPIs
can be kept when one mechanical cooler is in failure.
The Hitomi (ASTRO-H) mission is the sixth Japanese X-ray astronomy satellite developed by a large international collaboration, including Japan, USA, Canada, and Europe. The mission aimed to provide the highest energy resolution ever achieved at E > 2 keV, using a microcalorimeter instrument, and to cover a wide energy range spanning four decades in energy from soft X-rays to gamma-rays. After a successful launch on 2016 February 17, the spacecraft lost its function on 2016 March 26, but the commissioning phase for about a month provided valuable information on the on-board instruments and the spacecraft system, including astrophysical results obtained from first light observations. The paper describes the Hitomi (ASTRO-H) mission, its capabilities, the initial operation, and the instruments/spacecraft performances confirmed during the commissioning operations for about a month.
The Space Infrared Telescope for Cosmology and Astrophysics (SPICA) is a pre-project of JAXA in collaboration with ESA to be launched around 2025. The SPICA mission is to be launched into a halo orbit around the second Lagrangian point in the Sun-Earth system, which allows us to use effective radiant cooling in combination with a mechanical cooling system in order to cool a 3m large IR telescope below 6K. The use of 4K / 1K-class Joule-Thomson coolers is proposed in order to cool the telescope and provide a 4K / 1K temperature region for Focal Plane Instruments (FPIs). This paper introduces details of the thermal design study for the SPICA payload module in the Risk-Mitigation-Phase (RMP), in which the activity is focused on mitigating the mission’s highest risks. As the result of the RMP activity, most of all the goals have been fully satisfied and the thermal design of the payload module has been dramatically improved.
The Hard X-ray Imager and the Soft Gamma-ray Detector, onboard the 6th Japanese X-ray satellite ASTRO-H, aim at unprecedentedly-sensitive observations in the 5–80 keV and 40–600 keV bands, respectively. Because their main sensors are composed of a number of semi-conductor devices, which need to be operated in a temperature of –20 to –15◦C, heat generated in the sensors must be efficiently transported outwards by thermal conduction. For this purpose, we performed thermal design, with the following three steps. First, we additionally included thermally-conductive parts, copper poles and graphite sheets. Second, constructing a thermal mathematical model of the sensors, we estimated temperature distributions in thermal equilibria. Since the model had rather large uncertainties in contact thermal conductions, an accurate thermal dummy was constructed as our final step. Vacuum measurement with the dummy successfully reduced the conductance uncertainties. With these steps, we confirmed that our thermal design of the main sensors satisfies the temperature requirement.
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions developed by the Institute of Space and Astronautical Science (ISAS), with a planned launch in 2015. The ASTRO-H mission is equipped with a suite of sensitive instruments with the highest energy resolution ever achieved at E > 3 keV and a wide energy range spanning four decades in energy from soft X-rays to gamma-rays. The simultaneous broad band pass, coupled with the high spectral resolution of ΔE ≤ 7 eV of the micro-calorimeter, will enable a wide variety of important science themes to be pursued. ASTRO-H is expected to provide breakthrough results in scientific areas as diverse as the large-scale structure of the Universe and its evolution, the behavior of matter in the gravitational strong field regime, the physical conditions in sites of cosmic-ray acceleration, and the distribution of dark matter in galaxy clusters at different redshifts.
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions initiated
by the Institute of Space and Astronautical Science (ISAS). ASTRO-H will investigate the physics of the highenergy
universe via a suite of four instruments, covering a very wide energy range, from 0.3 keV to 600 keV.
These instruments include a high-resolution, high-throughput spectrometer sensitive over 0.3–12 keV with
high spectral resolution of ΔE ≦ 7 eV, enabled by a micro-calorimeter array located in the focal plane of
thin-foil X-ray optics; hard X-ray imaging spectrometers covering 5–80 keV, located in the focal plane of
multilayer-coated, focusing hard X-ray mirrors; a wide-field imaging spectrometer sensitive over 0.4–12 keV,
with an X-ray CCD camera in the focal plane of a soft X-ray telescope; and a non-focusing Compton-camera
type soft gamma-ray detector, sensitive in the 40–600 keV band. The simultaneous broad bandpass, coupled
with high spectral resolution, will enable the pursuit of a wide variety of important science themes.
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions initiated
by the Institute of Space and Astronautical Science (ISAS). ASTRO-H will investigate the physics of the
high-energy universe by performing high-resolution, high-throughput spectroscopy with moderate angular
resolution. ASTRO-H covers very wide energy range from 0.3 keV to 600 keV. ASTRO-H allows a combination
of wide band X-ray spectroscopy (5-80 keV) provided by multilayer coating, focusing hard X-ray
mirrors and hard X-ray imaging detectors, and high energy-resolution soft X-ray spectroscopy (0.3-12 keV)
provided by thin-foil X-ray optics and a micro-calorimeter array. The mission will also carry an X-ray CCD
camera as a focal plane detector for a soft X-ray telescope (0.4-12 keV) and a non-focusing soft gamma-ray
detector (40-600 keV) . The micro-calorimeter system is developed by an international collaboration led
by ISAS/JAXA and NASA. The simultaneous broad bandpass, coupled with high spectral resolution of
ΔE ~7 eV provided by the micro-calorimeter will enable a wide variety of important science themes to be
pursued.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.