This will count as one of your downloads.
You will have access to both the presentation and article (if available).
For example, for complex optical coatings (typically with more than 100 interfaces), the scattering response of the component is not directly correlated to the substrate spectrum, as it is the case for simple coatings (less than 40 layers). For this reason, an accurate modelling of light scattered by complex optical coatings requires a global analysis taking into account different parameters from the design and manufacturing to the conditions of use of the component.
We will present in this paper the last developments performed by the Scattering Group of Institut Fresnel for the modelling and the metrology of light scattered by complex optical components for space applications.
A specific care will be given to recent studies performed on narrow band filters for earth observation and high performances mirrors. For each of these applications, the specific problematics and corresponding challenges will be presented and experimental and numerical results will be detailed. The agreement between metrology and modelling will be highlighted.
Our laboratory has the theoretical, experimental and technological tools to design and fabricate numerous multilayer coatings with desirable optical properties in the visible and infrared spectral ranges. We have extended our expertise to the ultraviolet. We present here some results on high reflectivity multidielectric mirrors towards 250 nm in wavelength, produced by Ion Plating Deposition. The latter technique allows us to obtain surface treatments with low absorption and high resistance.
We give in this study the UV transparent materials and the manufacturing technology which have been the best suited to meet requirements.
Single UV layers were deposited and characterized. HfO2/SiO2 mirrors with a reflectance higher than 99% at 300 nm were obtained. Optical and non-optical characterizations such as UV spectrophotometric measurements, X-Ray Diffraction spectra, Scanning Electron Microscope and Atomic Force Microscope images were performed
After a description of the design steps, we will present the manufacturing of such multilayer stacks using magnetron sputtering technique and we will see how such coating technique is very well suited for production due to its high process reproducibility even for very thin layers required in metal-dielectric absorbers.
Monitoring of such coatings is also presented with the help of a powerful in situ optical system developed in collaboration with Institut Fresnel that allows characterization of in-situ refractive indices of deposited materials and broadband monitoring of the multilayer stack.
Many results will be given on qualification samples, such as environmental tests and spectral characterizations that show the stability of the performances in severe environmental conditions.
At last, we will focus on the spectral and angular scattering behavior of such absorbing coatings and we will present several measurements performed on glass or metallic substrates with different roughnesses.
For these reasons, it is essential to develop a metrological tool which provides an accurate quantification of the spectral and angular scattering losses behavior with sufficient angular and spectral resolutions.
In order to face this issue, new investigations were performed by our group at Institut Fresnel and led to the development of the new scatterometer SALSA (Spectral and Angular Light Scattering characterization Apparatus). The use of both a broad-band light source and a tunable filter allows to accurately select the illumination wavelength and the spectral bandwidth on the whole spectral range of CCD detectivity. In this paper we will present the performances of the setup and some experimental results.
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
View contact details
No SPIE Account? Create one
