This will count as one of your downloads.
You will have access to both the presentation and article (if available).
In this paper, we present the design and prototyping of the HARMONI Adaptive Optics Calibration Unit (AOCU). The AOCU consists of a set of on-axis sources (covering 0.5-2.4 μm) with a controllable wavefront shape. It will deploy into the instrument focal plane to inject calibration light into the rest of the system. The AOCU supports all-natural guide-star wavefront sensors for SCAO, HCAO, and LTAO.
The AOCU will be used to calibrate the WFSs, the internal interaction matrices of HARMONI, measure and compensate NCPAs between AO dichroics and the science detectors, and calibrate the pointing model zero position. The illumination assembly of the AOCU will consist of six diffraction-limited sources and a resolved source coupled into fibres. Because of the wide range of wavelengths and the spatial separations requirements, we use two endlessly single-mode fibres and a multimode fibre. In addition, several LED sources need to be coupled efficiently into the single-mode fibres. In this paper, we present the general AOCU design using off-the-shelf with a focus on the illumination and source module.
RISTRETTO is the evolution of the original idea of coupling the VLT instruments SPHERE and ESPRESSO,1 aiming at High Dispersion Coronagraphy. RISTRETTO is a visitor instrument that should enable the characterization of the atmospheres of nearby exoplanets in reflected light, by using the technique of high-contrast, high-resolution spectroscopy. Its goal is to observe Prox Cen b and other planets placed at about 35mas from their star, i.e. 2λ/D at λ=750nm. The instrument is composed of an extreme adaptive optics, a coronagraphic Integral Field Unit, and a diffraction-limited spectrograph (R=140.000, λ =620-840 nm).
We present the status of our studies regarding the coronagraphic IFU and the XAO system. The first in particular is based on a modified version of the PIAA apodizer, allowing nulling on the first diffraction ring. Our proposed design has the potential to reach ≥ 50% coupling and ≤ 10−4 contrast at 2λ/D in median seeing conditions.
ELT-HARMONI is the first light visible and near-IR integral field spectrograph (IFS) for the ELT. It covers a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics modes - SCAO (including a High Contrast capability) and LTAO - or with NOAO. The project is preparing for Final Design Reviews.
The High Contrast Module (HCM) will allow HARMONI to perform direct imaging and spectral analysis of exoplanets up to 106 times fainter than their host star. Quasi-static aberrations are a limiting factor and must be calibrated as close as possible to the focal plane masks to reach the specified contrast. A Zernike sensor for Extremely Low-level Differential Aberrations (ZELDA) will be used in real-time and closed-loop operation at 0.1Hz frequency for this purpose. Unlike a Shack-Hartmann, the ZELDA wavefront sensor is sensitive to Island and low-wind effects. The ZELDA sensor has already been tested on VLT-SPHERE1 and will be used in other instruments. Our objective is to adapt this sensor to the specific case of HARMONI.
A ZELDA prototype is being both simulated and experimentally tested at IPAG. Its nanometric precision has first been checked in 2020 in the case of slowly evolving, small wavefront errors, and without dispersion nor turbulence residuals. On this experimental basis, we address the performance of the sensor under realistic operational conditions including residuals, mis-centring, dispersion, sensitivity, etc. Atmospheric refraction residuals were introduced by the use of a prism, and turbulence was introduced by a spatial light modulator which is also used to minimise wavefront residuals in a closed loop in the observing conditions expected with HARMONI.
HARMONI is the first light visible and near-IR integral field spectrograph for the ELT. It covers a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics (AO) modes - SCAO (including a High Contrast capability) and LTAO - or with NOAO. The project is preparing for Final Design Reviews.
The SCAO system for HARMONI is based on a pyramid wavefront sensor (PWFS) operating in the visible (700 – 1000 nm). Previous implementations on very large telescopes have demonstrated the challenges associated with optimising PWFS performance on-sky, particularly when operated at visible wavelengths. ELT operation will pose further challenges for AO systems, particularly related to the segmentation of the telescope and the control of badly seen ‘petal modes’. In this paper we investigate these challenges in the context of the HARMONI SCAO system. We present the results of end-to-end simulations of our baseline approach, using a coupled control basis to avoid the runaway development of petal modes in the control loop. The impact of key parameters are investigated and methods for optical gain compensation and optimisation of the control basis are presented. We discuss recent updates to the control algorithms and demonstrate the possibility of improving performance using a form of super resolution. Finally, we report on the expected performance across a range of conditions.
HARMONI is the first light visible and near-IR integral field spectrograph for the ELT. It covers a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics modes - SCAO (including a High Contrast capability) and LTAO - or with NOAO. The project is preparing for Final Design Reviews.
The SCAO Sensors subsystem (SCAOS) is located within the Natural Guide Star Sensors (NGSS) system which includes several wavefront sensors (WFS) to cover the needs of the different HARMONI observing modes and operates in a cold, thermally stabilized (+2°C) and dry gas environment for thermal background limitation. To reach the required performance, the SCAOS will use different modules and mechanisms among which, two particularly critical devices have been prototyped and are tested: The SCAOS Pyramid Modulator Unit (SPMU) and the SCAOS Object Selection Mechanism (SOSM). Both devices are tip-tilt mirrors but have very different specifications (amplitude and speed). In this work, we will present and discuss the design, the assembly and the full test (performance, control) of the two systems, in both ambient and cold environments.
Linearized Analytical Phase Diversity : towards lab and on-sky demonstration on the Subaru Telescope
Wavefront sensors (WFSs) encode phase information of an incoming wavefront into an intensity pattern that can be measured on a camera. Several kinds of WFSs are used in astronomical adaptive optics. Among them, Fourier-based WFSs perform a filtering operation on the wavefront in the focal plane. The most well-known example of a WFS of this kind is the Zernike WFS. The pyramid WFS also belongs to this class. Based on this same principle, WFSs can be proposed, such as the
The RASCASSE project was commissioned by the French spatial agency (CNES) to study the SH and PD sensors for high-performance wavefront sensing. It involved ONERA and Thales Alenia Space (TAS), and LAM. Papers by TAS and LAM on the same project are available in this conference, too [1,2].
The purpose of our work at ONERA was to explore what the best performance both wavefront sensors can achieve in a space optics context. So we first performed a theoretical study in order to identify the main sources of errors and quantify them — then we validated those results experimentally.
The outline of this paper follows this approach: we first discuss phase diversity theoretical results, then Shack-Hartmann’s, then experimental results — to finally conclude on each sensor’s performance, and compare their weak and strong points.
The Pyramid now forms part of the baseline for several next generation Extremely Large Telescopes (ELTs). As such its behaviour under realistic operating conditions must be further understood in order to optimise performance. At LAM a detailed investigation into the performance of the Pyramid aims to fully characterise the behaviour of this wave-front sensor in terms of linearity, sensitivity and operation. We have implemented a Pyramid sensor using a high speed OCAM2 camera (with close to 0 readout noise and a frame rate of 1.5kHz) in order to study the performance of the Pyramid within a full closed loop adaptive optics system. This investigation involves tests on all fronts, from theoretical models and numerical simulations to experimental tests under controlled laboratory conditions, with an aim to fully understand the Pyramid sensor in both modulated and non-modulated configurations. We include results demonstrating the linearity of the Pyramid signals, compare measured interaction matrices with those derived in simulation and evaluate the performance in closed loop operation. The final goal is to provide an on sky comparison between the Pyramid and a Shack-Hartmann wave-front sensor, at Observatoire de la Côte d'Azur (ONERA-ODISSEE bench). Here we present the adaptive optics setup at LAM and latest experimental and modelling results. The loop is closed on different static wave-front errors: the initial shape of the deformable mirror (DM) and a turbulent-like shape projected onto the DM. The results demonstrate a Pyramid closed loop performance of 7–8nm rms wave-front error compared to a reference at surface.
Segmented mirrors are widely used today in diverse domains: fiber coupling, laser beam shaping, microscopy or retina imaging. If, these mirrors offer a solution to realize important monolithic sizes for giant telescopes in astronomy, they also raise the problem of segments cophasing and measurement of phase discontinuities. In this work, we aim to investigate a suitable WFS approach for pupil phase discontinuity measurement. Coupling a segmented PTT mirror (Iris AO) with four different WFS (Shack-Hartmann, Quadriwave Lateral Shearing Interferometer, Pyramid and Zernike Phase Mask), we study their sensitivity to segmented pupil: in particular, segment phasing, stability, saturation, flat, or still the addressing mode are then performed and compared.
We show in particular that the number of faces has influence on the number of pixels required to do the wave front sensing but no influence on the sensitivity and linearity range. To modify these criteria, we show that the modulation radius and the apex angle are much more relevant. Moreover we observe that the time spent on edges or faces during a modulation cycle allows to adjust the trade-off between sensitivity and linearity range.
We show, in addition to the expected PSF degradation with the field direction, that the PSF retains a coherent core even at large off-axis distances. We demonstrated the large performance improvement of fine tuning the sampling frequency for dimer natural guide stars and an improvement of approx. 50% in SR can be reached above the nominal case. We show that using a smaller AO system with only 20x20 sub-apertures it is possible to further increase performance and maintain equivalent performance even for large off-axis angles.
We analyze some restrictions found in the estimation process, which are general to any measurement technique. The insensitivity of the instrument to large values of outer scale is one of them, as the telescope becomes blind to outer scales larger than its diameter. Another problem is the contradiction between the length of data and the stationarity assumption of the turbulence (turbulence parameters may change during the data acquisition time).
Our method effectively deals with problems such as noise estimation, asymmetric correlation functions and wavefront propagation effects. It is shown that the latter cannot be neglected in high resolution AO systems or strong turbulence at high altitudes. The method is applied to the Gemini South MCAO system (GeMS) that comprises five wavefront sensors and two DMs. Statistical values of L0(h) at Cerro Pachón from data acquired with GeMS during three years are shown, where some interesting resemblance to other independent results in the literature are shown.
We tour the processing of both the isoplanatic and anisoplanatic tilt modes using the spatio-angular approach whereby the wavefront is estimated directly in the pupil plane avoiding a cumbersome explicit layered estimation on the 35-layer profiles we're currently using.
Taking the case of Harmoni, we cover the choice of wave-front sensors, the number and field location of guide-stars, the optimised algorithms to beat down angular anisoplanatism and the performance obtained with different temporal controllers under split high-order/low-order tomography or joint tomography. We consider both atmospheric and far greater telescope wind buffeting disturbances. In addition we provide the sky-coverage estimates thus obtained.
In this paper, the laser tomographic reconstruction process is described. Several methods (virtual DM, virtual layer projection) are studied, under the constraint of a single matrix vector multiplication. The pseudo-synthetic interaction matrix model and the LTAO reconstructor design are analysed. Moreover, the reconstruction parameter space is explored, in particular the regularization terms.
Furthermore, we present here the strategy to define the modal control basis and split the reconstruction between the Low Order (LO) loop and the High Order (HO) loop. Finally, closed loop performance obtained with a 3D turbulence generator will be analysed with respect to the most relevant system parameters to be tuned.
SPHERE/IRDIS: final performance assessment of the dual-band imaging and long slit spectroscopy modes
View contact details
No SPIE Account? Create one
