This will count as one of your downloads.
You will have access to both the presentation and article (if available).
Co-optimization of the lithography and etch processing is expected to be required to achieve the best pitch walk control. Previous work has shown that improving the across wafer CD uniformity of the line patterns after core etch has limited impact on the space CD uniformity after the SADP process, whereas the CD uniformity of the spaces after SAQP did show some dependence. There are additional space populations created by an SAQP process. The variation of these different populations, along with the spacer deposited line populations, is the root cause of the non-uniform grating that results in pitch walk. The complex interactions of the lithography and etch processes’ impact on the CD and profile need to be understood to produce the optimal performance.
Pitch walk is a component of the overall Edge Placement Error (EPE) budget. With current nodes using SAQP for multiple device layers and future nodes expected to continue to implement this patterning technique, minimization of pitch walk variability is an important part of overall patterning optimizations. In this work, we will show how cooptimized exposure dose and etch processes for SAQP patterning can improve pitch walk performance. We will provide a target exposure dose metric for a 32nm pitch SAQP grating. The methodology for achieving the best pitch walk performance by combination of etch process optimization with dose correction will also be shown.
In this paper we will introduce self-alignment based block and cut strategies using multi-color materials integration and show implementation for BEOL trench block patterning. We will present a breakdown of the key unit process challenges that were needed to be resolved for enabling the self-alignment such as: (a) material selection of multi-color approach; (b) planarization of spin on materials; (c) void-free gap fill for high aspect ratio features; and last but not the least, (c) etch selectivity of etching one material with respect to all other materials exposed. Further, we will present a comparison of our new self-alignment approach with standard approaches where we will articulate the advantages in terms of EPE relaxation and mask number reduction. We will conclude our talk with a brief snapshot of the future direction of our EPE improvement strategies and our view on the future of patterning beyond 5nm node for the industry.
In our previous work, such atomic order controllability was viable in complemented technique with etching and deposition [2]. Overlay issue form major potion in yield management, therefore, entire solution is needed keenly including alignment accuracy on scanner and detectability on overlay measurement instruments. As EPE (Edge placement error) was defined as the gap between design pattern and contouring of actual pattern edge, pattern registration in single process level must be considerable. The complementary patterning to fabricate 1D layout actually mitigates any process restrictions, however, multiple process step, symbolized as LELE with 193-i, is burden to yield management and affordability. Recent progress of EUV technology is remarkable, and it is major potential solution for such complicated technical issues. EUV has robust resolution limit and it must be definitely strong scaling driver for process simplification. On the other hand, its stochastic variation such like shot noise due to light source power must be resolved with any additional complemented technique.
In this work, we examined the nano-order CD and profile control on EUV resist pattern and would introduce excellent accomplishments.
View contact details
No SPIE Account? Create one
